5.0/ 5.0
100% pembeli merasa puas
4 rating • 4 ulasan
5(4)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99998
Subtotal
Rp19.500
W1209 Thermostat Temperature Controller inkubator control switch suhu
Rp19.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Kelistrikan
JIKA PEMESANAN LEBIH DARI 3pcs disarankan tanya STOK terlebih dahulu sebelum pesan pada kolom diskusi / chat.
Isi dalam paket :
Package Content:
1 x Modul W1209
1 x Waterproof NTC temperature sensor
W1209 Thermostat Temperature Controller Incubation Control Switch
Description:
Temperature control range: -50 ~ 110 C
Resolution: -9.9 to 99.9 is 0.1 C , 1 C temperature ranges other
Measurement Accuracy: 0.1 C
Control accuracy: 0.1 C
Hysteresis accuracy: 0.1 C
Refresh rate: 0.5 S
Input Power: DC12V
Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
Output: 1 Channel relay output, capacity = 10A
Environmental requirements: -10 ~ 60 degree Humidity 20% -85%
Size: 48 (L) * 40 (W) * 14 (D) mm
Power consumption: Static current:<=35MA, Attract current:<=65MA
Easy and convenient to use
The thermostat must be paired with a heater or cooler.
If you press the "SET" and hold for more than 5 seconds, the thermostat switches to the settings. The available settings are:
P0 - selection of the heater or cooler.
P1 - hysteresis (0.1-15 C, the default 2 C)
P2 - the task of the upper working temperature limit (default 110 C)
P3 - the task of the lower working temperature limit (default -50 C)
P4 - temperature correction (-7 + 7 C, default 0)
P5 - the delay on / off switch (0-10 sec., Default 0)
P6 - overtemperature alarm signal (0 +110 C, the default is off)
"KAMI MENYEDIAKAN PRODUK YANG BERKUALITAS, BAGI KAMI KUALITAS ADALAH NOMOR 1"
Kami tunggu pesanan anda
#we fast respon
Isi dalam paket :
Package Content:
1 x Modul W1209
1 x Waterproof NTC temperature sensor
W1209 Thermostat Temperature Controller Incubation Control Switch
Description:
Temperature control range: -50 ~ 110 C
Resolution: -9.9 to 99.9 is 0.1 C , 1 C temperature ranges other
Measurement Accuracy: 0.1 C
Control accuracy: 0.1 C
Hysteresis accuracy: 0.1 C
Refresh rate: 0.5 S
Input Power: DC12V
Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
Output: 1 Channel relay output, capacity = 10A
Environmental requirements: -10 ~ 60 degree Humidity 20% -85%
Size: 48 (L) * 40 (W) * 14 (D) mm
Power consumption: Static current:<=35MA, Attract current:<=65MA
Easy and convenient to use
The thermostat must be paired with a heater or cooler.
If you press the "SET" and hold for more than 5 seconds, the thermostat switches to the settings. The available settings are:
P0 - selection of the heater or cooler.
P1 - hysteresis (0.1-15 C, the default 2 C)
P2 - the task of the upper working temperature limit (default 110 C)
P3 - the task of the lower working temperature limit (default -50 C)
P4 - temperature correction (-7 + 7 C, default 0)
P5 - the delay on / off switch (0-10 sec., Default 0)
P6 - overtemperature alarm signal (0 +110 C, the default is off)
"KAMI MENYEDIAKAN PRODUK YANG BERKUALITAS, BAGI KAMI KUALITAS ADALAH NOMOR 1"
Kami tunggu pesanan anda
#we fast respon
Ada masalah dengan produk ini?