NADER MCB 1P 6A 6kA NDB1-63 NADER - NDB1-63C6/1

NADER MCB NDB1-63 -SNI IEC 60898-1:2009 -Application *Short -circuit protection *Over-load protection *Isolation NDB1-63 dedicated to the low voltage power distribution system of industrial, buildings, energy communications and infrastructure. -Electrical parameters *Number of Poles: 1P, 2P, 3P, 4P *Rated working Voltage: AC230/240/400/415V(1P);AC400/415V(2P,3P,4P);DC60/80V(1P,2P) *Rated Current: 2A , 4A , 6A , 10A , 16A , 20A , 25A , 32A , 40A , 50A , 63A *Rated Insulation Voltage: 500V *Rated Frequency: 50/60Hz *Rated Impulse Withstand Voltage: 4kV *Breaking Capacity: 6kA *Instantaneous Tripping Characteristic: C -Mechanical and Electrical life *Mechanical Life: 20000 times *Electrical Life: 10000 times -Isolation function *Practical breaking instructions *View window within the green identification said contact in the off position -Protection Degree *IP20 -Wire Feeding Mode *Lines in for both up and down ends -Use Category *A -Mounting Class *II, III -Tripping characteristic C type curve *Protect normal load and distribution wire cable *rated current:1A~63A *tripping characteristic:The instantaneous tripping range 5In~10In -Product certification and implementation of national standards *Product certification:CCC,CE,TUV *Conform to national standards:GB/T10963.1 ?IEC 60898-1 *Environmental requirements:RoHS -Ambient temperature:-40C~+70C -Stored ambient temperature:-40C~+80C -Heat and humidity resistance:The relative air humidity =95% at the temperature of +55C -Altitude:=2000m, if you want to apply it more than 2000m, you must refer to Miniature Circuit Breaker’s reduced capacity table. Also you can refer to GB/T20645 the technological requirement of the low-voltage electrical equipment when it is used on high altitude. -Pollution degree: 3