Terbaru M5Stack Core2 Esp32 Iot Development Kit For Aws Iot Edukit

Ready Stock!!! Silahkan bisa langsung di order Kak ^_^ The Core2 for AWS comes with an ESP32-D0WDQ6-V3 microcontroller, which features dual Xtensa 32-bit LX6 cores and a main frequency up to 240Mhz, with 2.4GHz Wi-Fi. Comes with 8MB PSRAM and 16MB flash on board. Before using, please go to download page to download the USB driver that matches your operating system, and install it. Note: Core2 currently has two CP2104/CH9102F A USB chip version, users can install the drivers (CH9102 and CP210x) that are compatible with two ICs at the same time to ensure that the device drivers work normally. Operations: Power on: One click the power button on the left Power off: Long press the left power button for 6 seconds Reset: Click the RST button on the bottom side Product Feature: - Reference hardware kit for use with AWS IoT EduKit - ESP32-D0WDQ6-V3, supports 2.4GHz Wi-Fi - 16M Flash, 8M PSRAM - Capacitive touch screen - Built-in PDM microphone, power indicator, 6-Axis IMU, vibration motor, I2S codec, Amplifier, Speaker, RTC, power button, reset button, 10 x RGB LEDs - TF card slot (support up to 16GB) - Validated through AWS Device Qualification Program Compatible with multi-platform development: - UIFlow - MicroPython - Arduino - .NET nanoFramework jika ada pertanyaan lebih lanjut silahkan chat ya kak UNTUK MENGHINDARI HAL YANG TIDAK DIINGINKAN, DIWAJIBKAN UNTUK MELAKUKAN REKAM VIDEO PADA SAAT PAKET DITERIMA!!! Membeli = Setuju Jika ingin menggunakan Grab atau Gosend Harap konfirmasi dahulu !!!