Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp9.428.000
Ready Jotun Barrier Grey - 9 Liter Zinc Rich Paint Organic Zinc Ready
Rp9.428.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
BARANG SLALU READY BISA LANGSUNG DIORDER
Key features :
- For severe corrosive environments
- Fast dry-to-recoat
- Fast dry-to-handle
- 80% zinc dust content
- NORSOK compliant
Barrier is an 80% zinc epoxy primer for highly corrosive environments. Barrier contains very high levels of zinc dust and provides very good corrosion protection when used as part of a complete coating system where extended durability is required. It is ideal as a primer in atmospheric environments, and can be used on carbon steel, for repair of inorganic zinc silicate coatings and on damaged galvanised steel substrates. Barrier complies with ASTM D520 type II zinc dust. It is recommended for offshore environments, refineries, power plants, bridges, buildings and on structural steel and piping exposed in corrosivity categories up to CX (ISO 12944-2).
Product Categories :
- Anticorrosive primers
- Zinc primers
Technology :
- Zinc epoxy
Substrate :
- Carbon steel
- Shop primed steel
- Galvanized steel
Certificates and Approvals :
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with
IMO 2010 FTP Code Ch. 8.
For more detailed and specific information about the standards, certificates and other documentation please see TDS
Barrier Comp A : 6,75 Liter
Barrier Comp B : 2,25 Liter
Thinner : No.17
Daya Sebar : 4,2-21,2m²/liter
~Packing aman
~Produk selalu kami cek ulang sebelum dikirim
~Barang kami adalah barang berkualitas
~Barang tidak sesuai foto & deskripsi bisa dikembalikan
Key features :
- For severe corrosive environments
- Fast dry-to-recoat
- Fast dry-to-handle
- 80% zinc dust content
- NORSOK compliant
Barrier is an 80% zinc epoxy primer for highly corrosive environments. Barrier contains very high levels of zinc dust and provides very good corrosion protection when used as part of a complete coating system where extended durability is required. It is ideal as a primer in atmospheric environments, and can be used on carbon steel, for repair of inorganic zinc silicate coatings and on damaged galvanised steel substrates. Barrier complies with ASTM D520 type II zinc dust. It is recommended for offshore environments, refineries, power plants, bridges, buildings and on structural steel and piping exposed in corrosivity categories up to CX (ISO 12944-2).
Product Categories :
- Anticorrosive primers
- Zinc primers
Technology :
- Zinc epoxy
Substrate :
- Carbon steel
- Shop primed steel
- Galvanized steel
Certificates and Approvals :
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with
IMO 2010 FTP Code Ch. 8.
For more detailed and specific information about the standards, certificates and other documentation please see TDS
Barrier Comp A : 6,75 Liter
Barrier Comp B : 2,25 Liter
Thinner : No.17
Daya Sebar : 4,2-21,2m²/liter
~Packing aman
~Produk selalu kami cek ulang sebelum dikirim
~Barang kami adalah barang berkualitas
~Barang tidak sesuai foto & deskripsi bisa dikembalikan
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan