Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp307.248
IXION by FATOOLS IX-HT08125 HSS Hand Tap M8 X 1.25 Handtap Alat Drat Senai 1,25
Rp307.248
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: MACHINERY & ACCESSORIES
> Hand taps are the straight flute taps. Due to the toughness at cutting edge, Hand taps are suitable for hard materials.
> Made High Speed Steel (HSS) material.
> 3 Pieces in One set contains as follows:
- TAPER 8 to 10 threads chamfered for easy thread starting in rough materials.
- PLUG 3 to 5 threads chamfered general use when tapping to bottom of holes is not
critical. (This is the most widely - used type of tap.)
- BOTTOMING 1. 1/2 threads chamfered - use after threads have been started for
tapping to bottom of hole.
> METRIC Size M3-M42 with selected pitch.
> Made High Speed Steel (HSS) material.
> 3 Pieces in One set contains as follows:
- TAPER 8 to 10 threads chamfered for easy thread starting in rough materials.
- PLUG 3 to 5 threads chamfered general use when tapping to bottom of holes is not
critical. (This is the most widely - used type of tap.)
- BOTTOMING 1. 1/2 threads chamfered - use after threads have been started for
tapping to bottom of hole.
> METRIC Size M3-M42 with selected pitch.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan