MS100 SpO2 Simulator,Pulse Oximeter Accuracy Oxygen Saturation Simulation CONTEC

Hign-concerned Chemical : None Become my follower and get a special discount MANUFACTURE: CONTEC MEDICAL SYSTEMS CO.,LTD Model Number: MS100 Brief Introduction MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter. Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded. Features Separated connection between simulator probe and host, operation and test are more convenient. 262K color and 320*240 TFT, adjustable brightness level. Film key-press, makes the operation more comfortable. Power with chargeable lithium battery, can display the charge information of battery. Key volume, can openorclose. Main Functions Oxygen saturation simulation; Pulse rate simulation; Patient state simulation preset; Can test the reaction time of device; Can simulate the SpO2 and pulse rate under different amplitude; Can test the performance of device under different interference source; Canselectdifferent R-curve. Main Parameters SpO2 Measuring range: 35 Resolution:1% Error: When SpO2 is 75, the error is the larger between 2~50 and P; no define when SpO2 is less than 50%. Pulse rate Measuring range:25bpm~250bpm Resolution:5bpm Error:1%1bpm Amplitude Measuring range:0.000 Resolution:1~20.000 for 0.100; 0.025~0.075%. Patient state 24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup. Voltage DC 3.6V~4.2V Power Supply Voltage 3.7 rechargeable lithium battery 1 Battery working life Charge and discharge no less thantimes. Accessaries A MS100 user manual A 5.0V adaptor