Xh-W1209 Modul Sensor Pengatur Suhu Termostat Miniatur Ntc Dengan

W1209 DC 12V LED Digital Display Thermostat Temperature Controller Regulator Switch Control Relay Miniature NTC Sensor Module Red Technical Parameters: Control range: -50~110 Degrees Celsius Input power: DC 12V Resolution: -9.9~99.9 is 0.1 Degree Celsius; Other temperature range is 1 Degree Celsius Measurement input: NTC (10K 0.5%) waterproof sensor Temperature measurement accuracy: 0.1 Degrees Celsius Output Range: One 10A Relay Control accuracy: 0.1 Degrees Celsius Environmental requirements: -10~60 Degrees Celsius Humidity 20%~85% Return difference accuracy: 0.1 Degrees Celsius Refresh frequency: 0.55 High temperature protection: 0~110 Degrees Celsius Specification size: 48*40mm Total power consumption: Quiescent current: lt;=35MA Pull-in current: lt;=65MA Display type: 0.28 inch three Bits Instructions: Connecting the power supply and load, then you could supply power to the controller. At this time, it shows the measured temperature. Press the SET key once, the display temperature flashes. Press +- to set the desired temperature. After the setting is complete, press SET to confirm the return. At this point, the controller automatically switches on and off according to the settings! The thermostat output is a 10A relay that satisfies a variety of high power loads. Make sure the is correct. Indicator, digital tube state description: Indicator light: Off indicates that the relay is off and on indicates that the relay is closed Digital tube: display LL is an open circuit of the sensor; display HH is beyond the measurement range; the thermostat will forcibly disconnect the relay; display --- for high temperature protection Parameter function description: Press and hold SET for 5 seconds to enter the main menu setting. Press +- to toggle P0...P8. Press and hold SET for 10 seconds. We deal in wholesale and retail Feel free to us #W1209 #LED SKU : 3131/1151459758841708544/55