KL18449 monotight - 6.35mm (1/4') Female x 6.35mm (1/4') Male Elbow

DAPATKAN HARGA LEBIH TERJANGKAU DAN LAYANAN PEMBUATAN FAKTUR PAJAK. BISA LANGSUNG HUBUNGI KAMI! Best price & tax invoice. Contact Us ! TELAH DIBUKA CABANG BALI!!! NEWLY OPENED BALI BRANCH!!! SHOWROOM WALK IN dan ONLINE STORE di https://www.tokopedia.com/homebrew-bali A continued commitment to improving Indonesia #39;s Homebrewing community. Monotight 6.35mm Female x 6.35mm Male Elbow This Elbow Piece is suitable for our 6.35mm (1/4 inch) PE Water/Beer/Gas Lineline or most lines with a 6.35mm outer diameter. This tubing is strong, can take high pressures and is compatible with a lot of water treatment equpiment, water filters, reverse osmosis fittings, fridges with water dispensers etc. It #39;s food safe so you can using this tubing with beer but it doesnt have the oxygen and co2 barrier properties that EVABarrier has so we would prefer for oxygen sensitive beverages that you use EVABarrier tuning instead. It will not fit the 8mm OD (4mm or 5mm ID) or 9.5mm OD EVABarrier line (with 6mm ID) but we do sell larger 8mm and 9.5mm duotight fittings separately. No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi If you want to purchase a tube cutter so you can get a nice clean cut then click here - Tube Cutter. These push in fittings have been engineered for maximised performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. What is EPDM? EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages.