Atur jumlah dan catatan
Stok Total: 45
Subtotal
Rp5.370.000
Holybro Pixhawk 4 Autopilot Set Promo
Rp5.370.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
selamat datang di toko kami kaka,
selamat berbelanja..
SELAMA PRODUK TERPOSTING/TERLIHAT BERARTI READY STOCK !!!
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
=========================================
Pixhawk 4 + PM02 12S + M10 GPS + Cable Set.
Pixhawk 4 features advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
The Pixhawk 4’s microcontroller has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.
High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.
The two external SPI buses and six associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS/Compass modules.
Note:
• M10 GPS Requires PX4 1.14 & ArduPilot 4.3 or newer.
• Power module comparison chart
Technical Specifications
Main FMU Processor
STM32F765 - 32 Bit Arm Cortex -M7, 216MHz, 2MB memory, 512KB RAM
IO Processor
STM32F103 - 32 Bit Arm Cortex-M3, 72MHz, 64KB SRAM (Current)
STM32F100 - 32 Bit Arm Cortex -M3, 24MHz, 8KB SRAM (Discontinued)
On-board sensors
Accel/Gyro: ICM-20689
Accel/Gyro: BMI055/ICM-20602
Mag: IST8310
Barometer: MS5611
Electrical Data
-Power module output: 4.9~5.5V
-Max input voltage:
selamat berbelanja..
SELAMA PRODUK TERPOSTING/TERLIHAT BERARTI READY STOCK !!!
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
=========================================
Pixhawk 4 + PM02 12S + M10 GPS + Cable Set.
Pixhawk 4 features advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
The Pixhawk 4’s microcontroller has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.
High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.
The two external SPI buses and six associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS/Compass modules.
Note:
• M10 GPS Requires PX4 1.14 & ArduPilot 4.3 or newer.
• Power module comparison chart
Technical Specifications
Main FMU Processor
STM32F765 - 32 Bit Arm Cortex -M7, 216MHz, 2MB memory, 512KB RAM
IO Processor
STM32F103 - 32 Bit Arm Cortex-M3, 72MHz, 64KB SRAM (Current)
STM32F100 - 32 Bit Arm Cortex -M3, 24MHz, 8KB SRAM (Discontinued)
On-board sensors
Accel/Gyro: ICM-20689
Accel/Gyro: BMI055/ICM-20602
Mag: IST8310
Barometer: MS5611
Electrical Data
-Power module output: 4.9~5.5V
-Max input voltage:
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan