Polymaker PolyMax PLA / ⌀1.75mm / 0.75kg / 3D Print Filament - Pilih Warna

Polymaker PolyMax PLA is a technical grade PLA that can produce highly accurate 3D print with ease, and is produced with Polymaker’s Nano-reinforcement technology, to deliver an incredible mechanical properties that makes it very strong compared to many other PLA filament, and can be an easy-to-use alternative to ABS or PETG.

PolyMax PLA features Jam-Free technology, where the filament only start softening by heat past 140°C. This allows PolyMax PLA more resistant to hotend/nozzle jamming that caused by heat creep around the hotend throat "cold end" area, but can melt rapidly once the filament enters the heat block "hot end" area, ensuring smooth & consistent extrusion.

3D Print Material guideline:
filagain. com/guideline/

---

Polymaker PolyMax PLA
Diameter ⌀ : 1.75mm
Net Weight Filament : 0.75kg

Recommended Print Temperature:
Hotend: 190-230 °C
Bed/Build Plate: 25-60 °C

---

Mohon Perhatikan:
- Mohon baca Info Penting/Catatan Toko kami untuk kebijakan return, hari kerja & pengiriman, dan catatan penting lainnya mengenai produk dan operasional kami.
- Warna asli produk mungkin sedikit berbeda dengan di foto karena perbedaan warna layar device dan pencahayaan ketika foto diambil.
- Agar bahan 3D print bisa lebih awet, kami rekomendasikan untuk menyimpan bahan filament pada filament container/dryer; sedangkan untuk bahan resin, botol nya ditutup rapat dan disimpan di tempat kering, adem dan jauh dari sinar matahari.

---

Filagain menjual bahan 3D print dari berbagai brand dan menawarkan program “Bank Sampah” dimana pembeli dapat menukarkan sampah 3D print menjadi Filapoint untuk pembelian selanjutnya di Filagain.

filagain. com
Environmentally Sustainable & More Affordable 3D Printing