5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp4.995.000
Fluke Networks Pro3000F50-KIT Tone Generator and Filtered Probe
Rp4.995.000
HARGA SUDAH TERMASUK PPN
Selamat Datang di Fluke Distributor Indonesia!
Barang 100% baru dan original dari Fluke. Semua barang kami juga mempunyai garansi resmi Fluke selama 1 tahun. Jadi apabila ada masalah, bisa langsung kontak ke kami karena barang kami bergarasnsi langsung dari distributor Fluke. Bukan barang black market, rakitan, atau sisa project.
Key features:
• Locates cables safely and effectively on active networks
• Kit includes IntelliTone toner, probe, adapters, patch cables, and test leads
• Verifies twisted pair installation with end to end continuity test
• IntelliTone digital toning eliminates noise and false signals
• SmartTone analog toning isolates individual wire pairs
Pro3000 Analog Toner Specifications
- User interface
1. Slide switch selects Continuity or Tone Mode
2. Push button switch selects SOLID, ALT or OFF
3. Tone mode LED
4. Continuity/Polarity LED
- Solid Frequency : 1000 Hz nominal
- Alternating Frequency : 1000/1500 Hz nominal
- Over Voltage Protection : 60 Vdc in Toner/Polarity Mode
- Output Power in Tone Mode : 8 dbm into 600 ohms
- Output Voltage Level in Continuity Mode : 8 Vdc with fresh battery
- Battery : 9V alkaline
- Temperature : Operating: -20° C to 60° C, Storage: -40° C to 70° C
- Case dimensions : 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
Pro3000 Analog Probe Specifications
- User interface
1. ON/OFF push button
2. Volume dial
3. Replaceable tip
4. 3.5 mm earphone jack
- Battery : 9V alkaline
- Temperature : Operating: -20° C to 60° C, Storage: -40° C to 70° C
- Case dimensions : 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)
• (2) 9-volt batteries
Apabila anda membutuhkan tipe lain, bisa langsung chat ke kami ya, kami melayani pembelian preorder dan indent untuk semua unit Fluke, Fluke Process Instrument, dan Fluke Network., dan Fluke Calibration.
Terima kasih
Selamat Datang di Fluke Distributor Indonesia!
Barang 100% baru dan original dari Fluke. Semua barang kami juga mempunyai garansi resmi Fluke selama 1 tahun. Jadi apabila ada masalah, bisa langsung kontak ke kami karena barang kami bergarasnsi langsung dari distributor Fluke. Bukan barang black market, rakitan, atau sisa project.
Key features:
• Locates cables safely and effectively on active networks
• Kit includes IntelliTone toner, probe, adapters, patch cables, and test leads
• Verifies twisted pair installation with end to end continuity test
• IntelliTone digital toning eliminates noise and false signals
• SmartTone analog toning isolates individual wire pairs
Pro3000 Analog Toner Specifications
- User interface
1. Slide switch selects Continuity or Tone Mode
2. Push button switch selects SOLID, ALT or OFF
3. Tone mode LED
4. Continuity/Polarity LED
- Solid Frequency : 1000 Hz nominal
- Alternating Frequency : 1000/1500 Hz nominal
- Over Voltage Protection : 60 Vdc in Toner/Polarity Mode
- Output Power in Tone Mode : 8 dbm into 600 ohms
- Output Voltage Level in Continuity Mode : 8 Vdc with fresh battery
- Battery : 9V alkaline
- Temperature : Operating: -20° C to 60° C, Storage: -40° C to 70° C
- Case dimensions : 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
Pro3000 Analog Probe Specifications
- User interface
1. ON/OFF push button
2. Volume dial
3. Replaceable tip
4. 3.5 mm earphone jack
- Battery : 9V alkaline
- Temperature : Operating: -20° C to 60° C, Storage: -40° C to 70° C
- Case dimensions : 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)
• (2) 9-volt batteries
Apabila anda membutuhkan tipe lain, bisa langsung chat ke kami ya, kami melayani pembelian preorder dan indent untuk semua unit Fluke, Fluke Process Instrument, dan Fluke Network., dan Fluke Calibration.
Terima kasih
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan