5.0/ 5.0
100% pembeli merasa puas
2 rating • 1 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
GEPRC Cinelog30 V3 DJI O4 Air Unit Pro ELRS Quadcopter FPV Drone BNF
Rp7.580.000
Summary
The Cinelog30 V3 features the O4 Air Unit PRO VTX, delivering superior image quality with precise color accuracy and fine detail with its advanced processing chip.
The frame is reinforced with aluminum for added strength, while the electronic compartment is designed with a wrap-around structure to protect internal components better. Dust-proof plugs safeguard the data ports, and the canopy shields the camera from impacts. The rear PDB promotes clean wiring and an efficient layout.
Powered by the TAKER F722 45A 32-bit AIO, 1404 3850KV motors, HQprop DT76mm x3 props, and a LiHV 4S 720mAh battery, the Cinelog30 V3 achieves up to 8:10 of flight time. With O4’s advanced imaging capabilities, it delivers smooth, high-quality cinematic footage.
Feature
Equipped with the latest O4 Air Unit PRO, offering sharp detail, high resolution, and excellent low-light performance.
Refined frame with a wrap-around design for enhanced protection of electronic components.
Aluminum-reinforced front and protective frame for added strength.
Sleek front cover to shield the O4 Air Unit PRO lens from impact.
Dust-proof plugs for data ports to prevent debris during takeoff and landing.
Custom PDB with receiver, buzzer, LED BEC, TVS, and anti-spark features.
Cinelog series underslung gimbal mount for stable, smooth footage with the O4 Air Unit PRO.
Precision-tuned PID settings by the GEPRC team for ultra-smooth, responsive flight control.
Specifications
Model: Cinelog30 V3 O4 Pro Quadcopter
Frame Model: GEP-CL30 V3
Carbon Fiber Plate Thickness: 2.5mm
Wheelbase: 128mm
Flight System: TAKER F722 45A 32Bit AIO
MCU: STM32F722RET6
Gyro: ICM 42688-P
FC Firmware: GEPRC_F722_AIO
Flash: 16MB
ESC: 32Bit 45A
Motor: SPEEDX2 1404 3850KV
Prop: HQprop DT76mmx3 V2
Battery Connector: XT30
VTX: O4 AIR Unit Pro
Camera: O4
Antenna: O4 original
Receiver: PNP(digital built-in VTS receiver) / ELRS2.4G / TBS NanoRX
TBS NanoRX Version Weight: 187±2g
Recommended Battery: LiHV 4S 660mAh-720mAh
Flight Time: 8’10″（Tested at slow cruising speeds; actual times may vary with flying method.)
Includes
1 x Cinelog30 V3
1 x Protective Frame (transparent black)
2 x HQprop DT76mmx3 V2 (pair)
1 x 15*150mm Battery Strap
1 x L-shaped Screwdriver 1.5mm
1 x Grey Canopy
1 x Black Canopy
1 x Spare Screw Pack
1 x Battery Anti-slip Pad
1 x Damping Ball Puncher
1 x Frequency Pairing Ejector pin
The Cinelog30 V3 features the O4 Air Unit PRO VTX, delivering superior image quality with precise color accuracy and fine detail with its advanced processing chip.
The frame is reinforced with aluminum for added strength, while the electronic compartment is designed with a wrap-around structure to protect internal components better. Dust-proof plugs safeguard the data ports, and the canopy shields the camera from impacts. The rear PDB promotes clean wiring and an efficient layout.
Powered by the TAKER F722 45A 32-bit AIO, 1404 3850KV motors, HQprop DT76mm x3 props, and a LiHV 4S 720mAh battery, the Cinelog30 V3 achieves up to 8:10 of flight time. With O4’s advanced imaging capabilities, it delivers smooth, high-quality cinematic footage.
Feature
Equipped with the latest O4 Air Unit PRO, offering sharp detail, high resolution, and excellent low-light performance.
Refined frame with a wrap-around design for enhanced protection of electronic components.
Aluminum-reinforced front and protective frame for added strength.
Sleek front cover to shield the O4 Air Unit PRO lens from impact.
Dust-proof plugs for data ports to prevent debris during takeoff and landing.
Custom PDB with receiver, buzzer, LED BEC, TVS, and anti-spark features.
Cinelog series underslung gimbal mount for stable, smooth footage with the O4 Air Unit PRO.
Precision-tuned PID settings by the GEPRC team for ultra-smooth, responsive flight control.
Specifications
Model: Cinelog30 V3 O4 Pro Quadcopter
Frame Model: GEP-CL30 V3
Carbon Fiber Plate Thickness: 2.5mm
Wheelbase: 128mm
Flight System: TAKER F722 45A 32Bit AIO
MCU: STM32F722RET6
Gyro: ICM 42688-P
FC Firmware: GEPRC_F722_AIO
Flash: 16MB
ESC: 32Bit 45A
Motor: SPEEDX2 1404 3850KV
Prop: HQprop DT76mmx3 V2
Battery Connector: XT30
VTX: O4 AIR Unit Pro
Camera: O4
Antenna: O4 original
Receiver: PNP(digital built-in VTS receiver) / ELRS2.4G / TBS NanoRX
TBS NanoRX Version Weight: 187±2g
Recommended Battery: LiHV 4S 660mAh-720mAh
Flight Time: 8’10″（Tested at slow cruising speeds; actual times may vary with flying method.)
Includes
1 x Cinelog30 V3
1 x Protective Frame (transparent black)
2 x HQprop DT76mmx3 V2 (pair)
1 x 15*150mm Battery Strap
1 x L-shaped Screwdriver 1.5mm
1 x Grey Canopy
1 x Black Canopy
1 x Spare Screw Pack
1 x Battery Anti-slip Pad
1 x Damping Ball Puncher
1 x Frequency Pairing Ejector pin
Ada masalah dengan produk ini?