0.96 inch Yellow Blue SPI OLED Module 128x64 0.96" LCD for Arduino ESP

This is the SPI (7 pin) version of the well-known 0.96" OLED. The benefits are:
1. Faster than I2C version (watch this SPI vs I2C demo video: https://youtu.be/SvOX-xs9v8M)
2. Can also act as an I2C OLED (so will only use 4 pin) by modifying some resistors at the module back


OLED displays advantages:
+ Lighter and thinner
+ Brighter and more contrast
+ Do not require a backlight
+ Low power consumption (only around 40mW)
+ Have a true black background, which makes for a more accurate video display
+ Can be refreshed much faster than LCDs, making them suitable for high-speed and high framerate video
+ Very wide field of view (approaching 170°)
+ Can be seen in a variety of lighting environments, both indoor and outdoor


Pin Definition:
+ GND: Ground
+ VDD: 3.3 - 5V
+ SCK: SPI clock
+ SDA: MOSI (Data signal from MCU to OLED)
+ RES: Reset
+ DC: Data/Command (Digital pin to signal if incoming byte is a command or screen data)
+ CS: Chip Select


Spesification:
+ Size: 0.96 inch
+ Resolution: 128 x 64
+ Color: white, blue, yellow, yellow blue (optional)
+ Viewing angle: > 160°
+ Backlight: OLED self-illumination, no backlight required
+ Driver chip: SSD1306
+ Communication method: SPI or I2C (by changing some resistors arragement)
+ Power consumption: 0.04W (normal operation)
+ Voltage support: DC 3.3 - 5V
+ Working temperature: -30 to 80°C


Note:
The components at the back of the module and the arragement may be different between each shipment, but the functionality should be the same.


Package includes:
1x OLED Module


Tutorial:
https://learn.adafruit.com/monochrome-oled-breakouts/overview
https://dronebotworkshop.com/oled-arduino/


Untuk Produk Display lainnya:
https://www.tokopedia.com/focuscamerashop/etalase/display


Graphic display, bitmap, LED, LCD, for arduino, ESP32, ESP8266, STM32, raspberry pi, raspberry pico, IIC