Share the same footprint as the well-known WROOM-32, but with uFL socket that allow you to use external antenna for better WiFi coverage.
Features:
+ Combo Wi-Fi, Bluetooth (BT), and Bluetooth Low Energy (BLE) module
+ Integrates with the ESP32-D0WD chip
+ Two independently controlled CPU cores with adjustable clock frequency from 80MHz to 240MHz
+ Sleep current is less than 5 µA, making it suitable for battery-powered and wearable-electronics applications
+ Classic Bluetooth for legacy connections, supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK), AVRCP
+ Including BLE GATT-based profiles, such as BlueFi, SPP-like, etc.
+ Bluetooth Low Energy (BLE) connects to smart phones, broadcasting low-energy beacons for easy detection
+ Wi-Fi modes: Soft-AP/Station/SoftAP+Station/P2P
ANTENNA
U.FL & PCB (selectable via jumper)
DIMENSIONS
18 x 25.5 x 3.1mm
FREQUENCY BAND
2.4GHz - 2.5GHz (2400 - 2483.5MHz)
CORE
Dual
CLOCK FREQUENCY
up to 240MHz
INTERFACES:
Wi-Fi mode: station/SoftAP/SoftAP+station/P2P
SD Card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR
GPIO, Capacitive touch sensor, ADC, DAC, LNA pre-amplier
MEMORY
4 MB Flash
448kB ROM
536kB SRAM
PINS
38 Pins
POWER
Average: 80 mA
PROTOCOLS:
Wi-Fi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps)
Wi-Fi: A-MPDU and A-MSDU aggregation and 0.4 guard interval support
Bluetooth: Bluetooth v4.2 BR/EDR and BLE specification
Network: IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
RADIO
Power Output 20.5 dBm
Sensitivity -98dBm
SECURITY/PROTECTION:
Security: WPA/WPA2/WPA2-Enterprise/WPS
Encryption: AES/RSA/ECC/SHA
SENSORS
Hall sensor, Temperature sensor
TEMPERATURE RANGE
-40 to 85°C
OPERATING VOLTAGE
2.7 ~ 3.6V
Link Arduino dan Atmel lainnya:
https://www.tokopedia.com/focuscamerashop/etalase/arduino-and-atmelLink ESP32 dan ESP8266 lainnya:
https://www.tokopedia.com/focuscamerashop/etalase/esp32-and-esp8266Microcontroller, ESP32, ESP32s, ESP-32, ESP-32s, Arduino, Uno, ESP8266, WiFi