4.2/ 5.0
60% pembeli merasa puas
5 rating • 3 ulasan
5(3)60%
4(0)0%
3(2)40%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 89
Subtotal
Rp315.000
Premium Flexible LED Matrix WS2812B 16x16 Individually Addressable RGB
Rp315.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: -- LED
Premium BTF Lighting Module:
1. Consistent Brightness & color throughout the matrix
2. No flicker
3. Ultra Bright
4. More Energy Efficient for given brightness
5. Longer lifetime
Note: Repeated / Over bending may significantly reduce the structural integrity of the flexible panel. It is advisable when bending it over curved surfaces to not be too rough with this product as you may damage LED traces or the panel itself. Needless to say, do NOT fold this matrix in half!
Application:
+ DIY Led Screen / LED Wall
+ Advertising Board
+ Apply to hotel, KTV, bars, indoor advertising signs
+ Festivel Christmas or wedding party decoration
IC type: WS2812B
Gray level: 256
Color: Full Color 24-bit
View angle: 120°
Input voltage: DC5V
FPCB: Flexible
FPCB board color: Black
Power: 0.1 - 0.3W/LED; Total 25 - 75W
Recommended power supply: DC5V 10A(50w) or DC5V 20A (100W)
Pixel Qty: 16 x 16 = 256 Pixels
Operating Temperature: -20 ~ +50°C
Dimension: 16 x 16 x 0.2cm
Waterproof level: IP30 non-waterproof
Features:
+ Individually Addressable
Using a programmable controller and you can program every led just you like. Every one led has its own IC chip.one IC controll one led.The chip buil in led.
+ Ultra Bright
Brightness can be adjusted freely.Do not stare at it for a long time, otherwise you will be dazzled when the led Brightness is the brightest.
+ Colorful
Red ,Green, Blue .Dream full color. curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software
+ Long life
Life span:more than 50000hrs
+ Spliceable
You can connect many LED matrix as one big LED matrix with more pixels
Tutorial : https://howtomechatronics.com/tutorials/arduino/how-to-control-ws2812b-individually-addressable-leds-using-arduino/
Library : http://fastled.io/
1. Consistent Brightness & color throughout the matrix
2. No flicker
3. Ultra Bright
4. More Energy Efficient for given brightness
5. Longer lifetime
Note: Repeated / Over bending may significantly reduce the structural integrity of the flexible panel. It is advisable when bending it over curved surfaces to not be too rough with this product as you may damage LED traces or the panel itself. Needless to say, do NOT fold this matrix in half!
Application:
+ DIY Led Screen / LED Wall
+ Advertising Board
+ Apply to hotel, KTV, bars, indoor advertising signs
+ Festivel Christmas or wedding party decoration
IC type: WS2812B
Gray level: 256
Color: Full Color 24-bit
View angle: 120°
Input voltage: DC5V
FPCB: Flexible
FPCB board color: Black
Power: 0.1 - 0.3W/LED; Total 25 - 75W
Recommended power supply: DC5V 10A(50w) or DC5V 20A (100W)
Pixel Qty: 16 x 16 = 256 Pixels
Operating Temperature: -20 ~ +50°C
Dimension: 16 x 16 x 0.2cm
Waterproof level: IP30 non-waterproof
Features:
+ Individually Addressable
Using a programmable controller and you can program every led just you like. Every one led has its own IC chip.one IC controll one led.The chip buil in led.
+ Ultra Bright
Brightness can be adjusted freely.Do not stare at it for a long time, otherwise you will be dazzled when the led Brightness is the brightest.
+ Colorful
Red ,Green, Blue .Dream full color. curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software
+ Long life
Life span:more than 50000hrs
+ Spliceable
You can connect many LED matrix as one big LED matrix with more pixels
Tutorial : https://howtomechatronics.com/tutorials/arduino/how-to-control-ws2812b-individually-addressable-leds-using-arduino/
Library : http://fastled.io/
Ada masalah dengan produk ini?