Thin Layer Chromatography Silica Gel Plate Cutter Chromatography Plat

Thin Layer Chromatography Silica Gel Plate Cutter Chromatography Plate Cutter Tlc Cutter + One Cutter Head Membeli berati setuju dengan peraturan PO Pree Order:) Baca Spesifikasi produk di deskripsi dengan lengkap:) Type : Hand Tool Parts gin : Mainland China This Instrument Is Designed For Cutting Thin Layer Plates, And Is Mainly Used To Cut Thin Layer Chromatography Plates According To The Specified Size. 1. It Is Suitable For Cutting Thin-Layer Boards Accurately. 2. It Can Cut Thin-Layer Boards Up To 3Mm-5Mm Thick, Which Is Convenient And Quick. 3. Easy To Use, You Can Read The Required Size Directly On The Scale. 4. Regular And Effectively Avoid The Waste Caused By Previous Cutting. 1. The Position Marked At 1 In The Figure Is The Position Of The Cutting Head. Press The Top. Be Careful Not To Apply Too Much Force. Avoid Breaking The Silicone Plate. 2. There Is A Small Red Dot At The Bottom Of The 2 Marked Positions In The Figure. This Point Is The Position Of The Cutter Head (In The Middle Of The Plastic Part). When Scribing The Board, Refer To The Scale Below. 3. The Bolt In 3 In The Figure Can Adjust The Position Of The Cutter Head When It Reaches The Bottom, So As Not To Go Over The Head. 4. 4 In The Figure Is The Scale Ruler. After Cutting The Lengthwise As Shown In The Figure, You Can Take Out The Whole Backing Plate, And Turn The Direction With The Scale Ruler To The Direction Marked By 2 In The Figure, And Cut It Horizontally, According To The Size You Need. If You Have Any Questions During Use, You Can Consult Our Company #39;S Technical Staff, Thank You