5.0/ 5.0
100% pembeli merasa puas
12 rating • 2 ulasan
5(12)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 96
Subtotal
Rp155.000
BetaFPV ExpressLRS Nano RX Long Range ELRS 915Mhz RX Receiver LRS
Rp155.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Flight Controller PDB BEC Other Boards
Versi 1.3
----------------
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range.
This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
We suggest our customers upgrade their modules and receivers' ELRS version to 3.3.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Specification
Weight: 0.7g (receiver only)
Size: 12mm*19mm
Telemetry power: 20dbm
Frequency bands (Nano receiver 2.4G version): 2.4GHz
ISM Frequency bands (Nano receiver 915MHz/868MHz version): 915MHz FCC/868MHz
EU Input voltage: 5V
Antenna connector: IPEX MHF
Diagram Nano receiver 2.4G version diagram as shown below.
Note: Now the firmware version of the Nano receiver and module manufactured by our company is ELRS 3.3.0.;
ELRS Innovative team has officially released version 1.0.0, based on the version, we have some updates:
2.4G Nano TX Module supports 500Hz refresh rate；
Short press the button on the Nano module 3 times to get into the binding status.
Package
1 * BETAFPV ELRS Nano receiver
1 * BETAFPV T antenna
2 * Spare shrink tube
4 * 30awg silicon connection wires (1 black, 1 red, 1 white, 1 yellow)
1 * pin header 1x4
1 * Nano receiver user manualVersi 1.3
----------------
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range.
This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
We suggest our customers upgrade their modules and receivers' ELRS version to 3.3.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Specification
Weight: 0.7g (receiver only)
Size: 12mm*19mm
Telemetry power: 20dbm
Frequency bands (Nano receiver 2.4G version): 2.4GHz
ISM Frequency bands (Nano receiver 915MHz/868MHz version): 915MHz FCC/868MHz
EU Input voltage: 5V
Antenna connector: IPEX MHF
Diagram Nano receiver 2.4G version diagram as shown below.
Note: Now the firmware version of the Nano receiver and module manufactured by our company is ELRS 3.3.0.;
ELRS Innovative team has officially released version 1.0.0, based on the version, we have some updates:
2.4G Nano TX Module supports 500Hz refresh rate；
Short press the button on the Nano module 3 times to get into the binding status.
Package
1 * BETAFPV ELRS Nano receiver
1 * BETAFPV T antenna
2 * Spare shrink tube
4 * 30awg silicon connection wires (1 black, 1 red, 1 white, 1 yellow)
1 * pin header 1x4
1 * Nano receiver user manual
----------------
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range.
This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
We suggest our customers upgrade their modules and receivers' ELRS version to 3.3.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Specification
Weight: 0.7g (receiver only)
Size: 12mm*19mm
Telemetry power: 20dbm
Frequency bands (Nano receiver 2.4G version): 2.4GHz
ISM Frequency bands (Nano receiver 915MHz/868MHz version): 915MHz FCC/868MHz
EU Input voltage: 5V
Antenna connector: IPEX MHF
Diagram Nano receiver 2.4G version diagram as shown below.
Note: Now the firmware version of the Nano receiver and module manufactured by our company is ELRS 3.3.0.;
ELRS Innovative team has officially released version 1.0.0, based on the version, we have some updates:
2.4G Nano TX Module supports 500Hz refresh rate；
Short press the button on the Nano module 3 times to get into the binding status.
Package
1 * BETAFPV ELRS Nano receiver
1 * BETAFPV T antenna
2 * Spare shrink tube
4 * 30awg silicon connection wires (1 black, 1 red, 1 white, 1 yellow)
1 * pin header 1x4
1 * Nano receiver user manualVersi 1.3
----------------
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range.
This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
We suggest our customers upgrade their modules and receivers' ELRS version to 3.3.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Specification
Weight: 0.7g (receiver only)
Size: 12mm*19mm
Telemetry power: 20dbm
Frequency bands (Nano receiver 2.4G version): 2.4GHz
ISM Frequency bands (Nano receiver 915MHz/868MHz version): 915MHz FCC/868MHz
EU Input voltage: 5V
Antenna connector: IPEX MHF
Diagram Nano receiver 2.4G version diagram as shown below.
Note: Now the firmware version of the Nano receiver and module manufactured by our company is ELRS 3.3.0.;
ELRS Innovative team has officially released version 1.0.0, based on the version, we have some updates:
2.4G Nano TX Module supports 500Hz refresh rate；
Short press the button on the Nano module 3 times to get into the binding status.
Package
1 * BETAFPV ELRS Nano receiver
1 * BETAFPV T antenna
2 * Spare shrink tube
4 * 30awg silicon connection wires (1 black, 1 red, 1 white, 1 yellow)
1 * pin header 1x4
1 * Nano receiver user manual
Ada masalah dengan produk ini?