Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp850.000
NeutronRC 4in1 45A BLHeli_32 Electronic Speed Controller ESC
Rp850.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Speed Controller
BLHeli_32 G071 45A:
1. Main control chip: STM32G071 main control chip, operating frequency up to 64MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pad adopts electroplating copper process to avoid the pad falling off during use. 3 oz thick copper, 4+4 double-layer board design, greatly reduces heat, thus improving efficiency.
2. High-performance 45A ESC: Integrating 4 high-performance 50A ESCs, the integration level is so high, the volume is only about the size of a horizontal wire machine, and the installation and wiring become very simple. This unbelievable size and volume is designed for racing-grade crossovers.
3. Rich functions: adopt BLHeli_32 firmware (optional AM32 firmware), powerful performance, rich functions, support multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, use other development boards, or Use cleanflight or Betaflight firmware to setup or upgrade ESCs).
4. PWM hardware drive motor: PWM hardware drive motor, low noise, smoother throttle response. Damped Light technology and regenerative braking function make the deceleration of the motor more sensitive and effective, and the control is more precise. Active power-renewal technology restores battery power and prolongs sailing time.
5. Anti-interference and fast response: not only supports ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high temperature resistant, and easy to weld.
Specification:
Item Type: 4 in 1 45A ESC
Weight: Approx. 15g/
Material: electronic components
Colour: Black+Blue
ESC size: about 42 x 40 mm
Fixing hole: Approx. 30.5 x 30.5 mm/1.2 x 1.2 inches
Fixed aperture: M3
Working voltage: 2-6s
Maximum continuous working current: 45A
Maximum instantaneous current: 60A
Supports: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 and Multshot
Software: BLHeliSuite/AM32
Firmware version: BLHeli32 32.9(96K)
Application: Suitable for unmanned remote control drones and FPV vehicles, etc.
1. Main control chip: STM32G071 main control chip, operating frequency up to 64MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pad adopts electroplating copper process to avoid the pad falling off during use. 3 oz thick copper, 4+4 double-layer board design, greatly reduces heat, thus improving efficiency.
2. High-performance 45A ESC: Integrating 4 high-performance 50A ESCs, the integration level is so high, the volume is only about the size of a horizontal wire machine, and the installation and wiring become very simple. This unbelievable size and volume is designed for racing-grade crossovers.
3. Rich functions: adopt BLHeli_32 firmware (optional AM32 firmware), powerful performance, rich functions, support multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, use other development boards, or Use cleanflight or Betaflight firmware to setup or upgrade ESCs).
4. PWM hardware drive motor: PWM hardware drive motor, low noise, smoother throttle response. Damped Light technology and regenerative braking function make the deceleration of the motor more sensitive and effective, and the control is more precise. Active power-renewal technology restores battery power and prolongs sailing time.
5. Anti-interference and fast response: not only supports ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high temperature resistant, and easy to weld.
Specification:
Item Type: 4 in 1 45A ESC
Weight: Approx. 15g/
Material: electronic components
Colour: Black+Blue
ESC size: about 42 x 40 mm
Fixing hole: Approx. 30.5 x 30.5 mm/1.2 x 1.2 inches
Fixed aperture: M3
Working voltage: 2-6s
Maximum continuous working current: 45A
Maximum instantaneous current: 60A
Supports: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 and Multshot
Software: BLHeliSuite/AM32
Firmware version: BLHeli32 32.9(96K)
Application: Suitable for unmanned remote control drones and FPV vehicles, etc.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan