5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp255.000
NewBeeDrone Mosquito XL Frame
Rp255.000
NewBeeDrone Mosquito XL - 65mm Propeller Whoop Frame Miskito
Designed to drop-in your existing whoop electronics, the Mosquito XL transforms your whoop into an outdoor nano beast!
With 65mm props the Mosquito flies like a 3 inch toothpick but at a lighter weight and smaller form factor.
We recommend using the BeeBrain BLV3 AIO and Gold 0802 18000KV motors with 1s batteries. While designing the Mosquito XL, we found that the 0802 motors provide plenty of power while keeping the weight low.
Note: The frame does not accept the mounting of larger motors. If your existing whoop motors have wires that are too short, solder on the included motor wires. When doing so, check that the solder joints are not coming into contact with the carbon fiber frame.
Specifications
Carbon Weight: 7.5g
Carbon Fiber Thickness: 2.5mm
Carbon + Battery Mounting Weight: 8.0g
Motor to Motor Diagonal Distance: 104mm
Includes
1x Mosquito Frame
1x 1s Battery Mount
1x 2s Battery Mount
6x Rubber Bands
14x M1.4 4mm Screws
2x M2 6mm Screws
4x M2 9mm Screws
5x M2 Flight Controller Grommets
1x Motor Wire Extensions
Designed to drop-in your existing whoop electronics, the Mosquito XL transforms your whoop into an outdoor nano beast!
With 65mm props the Mosquito flies like a 3 inch toothpick but at a lighter weight and smaller form factor.
We recommend using the BeeBrain BLV3 AIO and Gold 0802 18000KV motors with 1s batteries. While designing the Mosquito XL, we found that the 0802 motors provide plenty of power while keeping the weight low.
Note: The frame does not accept the mounting of larger motors. If your existing whoop motors have wires that are too short, solder on the included motor wires. When doing so, check that the solder joints are not coming into contact with the carbon fiber frame.
Specifications
Carbon Weight: 7.5g
Carbon Fiber Thickness: 2.5mm
Carbon + Battery Mounting Weight: 8.0g
Motor to Motor Diagonal Distance: 104mm
Includes
1x Mosquito Frame
1x 1s Battery Mount
1x 2s Battery Mount
6x Rubber Bands
14x M1.4 4mm Screws
2x M2 6mm Screws
4x M2 9mm Screws
5x M2 Flight Controller Grommets
1x Motor Wire Extensions
Ada masalah dengan produk ini?