Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp14.750.000
Palet Module RF HF 1.8-30 Mhz Linear Amplifier HF 3000 Watt PEP
Rp14.750.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Exciter FM
Palet Module RF HF 1.8-30 Mhz Linear Amplifier HF 3000 Watt PEP
This RF Amplifier Board is MADE in the USA and includes 2 BLF188XR LDMOS Transistors and a Copper Heat Spreader (drilling and tapping is required).
The transistors used are extremely rugged and can withstand an SWR mismatch for 65:1 or greater at all phase angles.
The PC board is professionally fabricated and is designed to produce a very high efficiency (greater than 75%).
The amplifier is design for the High Frequency Band and supports AM, FM, CCW, and SSB operating modes. The bias current is preset to 500mA and can be readjusted by use of 2 independent potentiometers.
The board dimensions are 4" wide by 7.5" long. A large aluminum heat sink (not included) and forced air are required for cool / reliable operation.
The board ships FULLY ASSEMBLED and TESTED with schematic, installation guidelines, and operating setup instructions.
Product Description:
Amplifier Topology is Push / Pull
3000 watts PEP Output Power (High Power Output)
Operating Voltage 50 - 56 volts DC
Current Draw 40 - 50 amps
Input power 1.0 - 1.5 watts (depending on radio used)
Idle Current 500 mA
Operating Class AB
Cooling Requirements forced air
This RF Amplifier Board is MADE in the USA and includes 2 BLF188XR LDMOS Transistors and a Copper Heat Spreader (drilling and tapping is required).
The transistors used are extremely rugged and can withstand an SWR mismatch for 65:1 or greater at all phase angles.
The PC board is professionally fabricated and is designed to produce a very high efficiency (greater than 75%).
The amplifier is design for the High Frequency Band and supports AM, FM, CCW, and SSB operating modes. The bias current is preset to 500mA and can be readjusted by use of 2 independent potentiometers.
The board dimensions are 4" wide by 7.5" long. A large aluminum heat sink (not included) and forced air are required for cool / reliable operation.
The board ships FULLY ASSEMBLED and TESTED with schematic, installation guidelines, and operating setup instructions.
Product Description:
Amplifier Topology is Push / Pull
3000 watts PEP Output Power (High Power Output)
Operating Voltage 50 - 56 volts DC
Current Draw 40 - 50 amps
Input power 1.0 - 1.5 watts (depending on radio used)
Idle Current 500 mA
Operating Class AB
Cooling Requirements forced air
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan