5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Insta360 Flexible Adhesive Mount with 1/4" to 2-Prong Adapter ORIGINAL
Rp479.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Insta360 Flexible Adhesive Mount
Flexible design that can be used on flat and curved surfaces.
Strong 3M adhesive base for use in complex environments. Heat and humidity resistant.
Includes 2x Flexible Adhesive Mounts.
Comes with 1/4″ to 2-Prong Adapter for use with other accessories.
GO 3 must be assembled with the Quick Release Mount.
IN THE BOX :
2x Flexible Adhesive Mount (with 3M adhesive base)
2x 1/4″ to 2-Prong Adapter
2x Thumb Screw
8x Anti-slip Ring
2x Cleaning Wipe
1x User Manual
Main Material
Thermoplastic Polyurethane
Weight
82.8g(2.9oz)
Diameter
66.5mm (2.6in)
***NOTE***
Before Using
Clean the base with the cleaning wipe. Stick to the surface and press and hold for 30
seconds. Please wait at least 24 hours before using it with your camera.
1. Follow these instructions to use the Flexible Adhesive Mount:
a. Clean the base with a cleaning wipe before use. Ensure the surface is clean, dry and
smooth.
b. If the sticky base detaches from the surface, it cannot be reused.
c. To ensure a strong hold, press and hold the product for 30 seconds after sticking to
a surface.
d. Wait at least 24 hours after sticking to use it with a product.
e. If the 3-prong adapter becomes worn, apply the anti-slip ring for more security.
f. This product cannot be used with any selfie sticks.
2. The product should be mounted to a smooth, clean surface, such as glass, ceramic,
plastic, painted surfaces, metal, etc.
3. Using this product on a highly curved surface may impact its performance.
4. Exercise caution using this product on a surfboard as due to the complicated
environment, the camera is at risk of falling off.
5. The mount can be directly connected to a camera or used with a carbon fiber
extension rod on a helmet. It cannot be used with any selfie sticks.
6. The mount is surface-treated to increase adhesion. Do not replace the double -sided
adhesive by yourself.
7. Avoid DIY modifications or third-party accessories. Improper installation could cause
damage to the pr
Flexible design that can be used on flat and curved surfaces.
Strong 3M adhesive base for use in complex environments. Heat and humidity resistant.
Includes 2x Flexible Adhesive Mounts.
Comes with 1/4″ to 2-Prong Adapter for use with other accessories.
GO 3 must be assembled with the Quick Release Mount.
IN THE BOX :
2x Flexible Adhesive Mount (with 3M adhesive base)
2x 1/4″ to 2-Prong Adapter
2x Thumb Screw
8x Anti-slip Ring
2x Cleaning Wipe
1x User Manual
Main Material
Thermoplastic Polyurethane
Weight
82.8g(2.9oz)
Diameter
66.5mm (2.6in)
***NOTE***
Before Using
Clean the base with the cleaning wipe. Stick to the surface and press and hold for 30
seconds. Please wait at least 24 hours before using it with your camera.
1. Follow these instructions to use the Flexible Adhesive Mount:
a. Clean the base with a cleaning wipe before use. Ensure the surface is clean, dry and
smooth.
b. If the sticky base detaches from the surface, it cannot be reused.
c. To ensure a strong hold, press and hold the product for 30 seconds after sticking to
a surface.
d. Wait at least 24 hours after sticking to use it with a product.
e. If the 3-prong adapter becomes worn, apply the anti-slip ring for more security.
f. This product cannot be used with any selfie sticks.
2. The product should be mounted to a smooth, clean surface, such as glass, ceramic,
plastic, painted surfaces, metal, etc.
3. Using this product on a highly curved surface may impact its performance.
4. Exercise caution using this product on a surfboard as due to the complicated
environment, the camera is at risk of falling off.
5. The mount can be directly connected to a camera or used with a carbon fiber
extension rod on a helmet. It cannot be used with any selfie sticks.
6. The mount is surface-treated to increase adhesion. Do not replace the double -sided
adhesive by yourself.
7. Avoid DIY modifications or third-party accessories. Improper installation could cause
damage to the pr
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan