MASTER CONTROL FIRE ALARM MCFA / PANEL CONVENTIONAL 1 ZONE

Master Control Fire Alarm (MCFA) / Panel Conventional 1 zone AW-CFP2166-1

1 fire alarm zone, 2 bell outputs, 1 fire relay,1 fault relay, metal shell
c/w batteries

AC INPUT : 220VAC 50/60Hz +10% | -15%
DC OUTPUT : 24VDC typical
Voltage for MCU : 5V
Current @ 220VAC : standby current ≤250mA
Maximum current : 1A
Batteries current : 750mA maximum, current limited
Batteries : 2*12V/ 2.3Ah sealed lead acid gel, self-regulated
Battery low-voltage protection : 22.2V
The maximum and minimum electrical ratings for each input and output : Detectots / zone lines: 21V-26V Sounder1 and sounder2 lines:21-26.2V Fire protection/Fire routing/Fault routing lines:21-26.2V
Max points (detector and MCP) per CIE : 20 detectors and 10 MCPs
Zone alarm current : 6mA minimum/ 27mA maximum
ounder output : 2*0.3A maximum
RMaster Control Fire Alarm (MCFA) / Panel Conventional 1 zone AW-CFP2166-1

1 fire alarm zone, 2 bell outputs, 1 fire relay,1 fault relay, metal shell
c/w batteries

AC INPUT : 220VAC 50/60Hz +10% | -15%
DC OUTPUT : 24VDC typical
Voltage for MCU : 5V
Current @ 220VAC : standby current ≤250mA
Maximum current : 1A
Batteries current : 750mA maximum, current limited
Batteries : 2*12V/ 2.3Ah sealed lead acid gel, self-regulated
Battery low-voltage protection : 22.2V
The maximum and minimum electrical ratings for each input and output : Detectots / zone lines: 21V-26V Sounder1 and sounder2 lines:21-26.2V Fire protection/Fire routing/Fault routing lines:21-26.2V
Max points (detector and MCP) per CIE : 20 detectors and 10 MCPs
Zone alarm current : 6mA minimum/ 27mA maximum
Sounder output : 2*0.3A maximum
Relay contacts rating : Dryelay contacts rating : Dry contacts (NO/NC) 1A @24VDC
EOL resistor for zone and outputs : 6.8K 1W
Fuse on EMI board : 2A/ 250V Ceramic slow blow fuse 5*20(mm)
Environmental : Class A temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing