Audio Technica AT2035 / AT 2035 Cardioid Condenser Microphone Original - AT2035

Audio Technica AT2035
Cardioid Condenser Microphone

100% PRODUK RESMI
100% PRODUK ORIGINAL
GARANSI RESMI 1 TAHUN
AUDIO TECHNICA INDONESIA

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

FEATURES
• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Custom shock mount provides superior isolation
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

SPECIFICATION
•ELEMENT
Fixed-charge back plate, permanently polarized condenser
•POLAR PATTERN
Cardioid
•FREQUENCY RESPONSE
20-20,000 Hz
•LOW FREQUENCY ROLL-OFF
80 Hz, 12 dB/octave
•OPEN CIRCUIT SENSITIVITY:
-33 dB (22.4 mV) re 1V at 1 Pa
•IMPEDANCE: 120 ohms
•MAXIMUM INPUT SOUND LEVEL:
148 dB SPL, 1 kHz at 1% T.H.D.; 
158 dB SPL, with 10 dB pad (nominal)
•NOISE: 12 dB SPL
•DYNAMIC RANGE (typical):
136 dB, 1 kHz at Max SPL
•SIGNAL-TO-NOISE RATIO:
82 dB, 1 kHz at 1 Pa
•PHANTOM POWER REQUIREMENTS:
11-52V DC, 3.8 mA typical
•SWITCHES: Flat, roll-off; 
10 dB pad (nominal)
•WEIGHT: 403 g (14.2 oz)
•DIMENSIONS:
170.0 mm (6.69") long, 
52.0 mm (2.05") maximum body diameter
•OUTPUT CONNECTOR:
Integral 3-pin XLRM-type