5.0/ 5.0
100% pembeli merasa puas
3 rating • 1 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
iFi SilentPower / Silent Power GND Defender Intelligent Ground Control / IEC Connector Ground Loop Remover
Rp1.632.510
diskon 3%
Harga sebelum diskon Rp1.683.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: IFI
iFi SilentPower GND Defender
Intelligent Ground Control, IEC Connector Ground Loop Remover
100% PRODUK RESMI
100% PRODUK ORIGINAL
GARANSI RESMI
1 TAHUN PT IOT
Ground control to Major components.
The optimum configuration for each system is one Ground/Earth for the whole system. If a system has multiple Grounds/Earths, then it often creates unwanted ground loops. These systems will then have an annoying low-frequency hum (emitted from the speakers).
Current solutions either jeopardise (i) both safety and EMI shielding (e.g. cheater plug), or (ii) EMI shielding. And most are single country (US) uses only.
The GND Defender in the correct way, intelligently detects a ground loop and will cut the ground for that component.
SPECIFICATION
•Al Ground Detection each unit will automatically disconnect the ground on that device
•Ground Safe-auto reinstatement of ground connection to pass current if a fault is detected
•Voltage rating 90-240 volts
•Surge overload rating 220A
•Continuous current rating 10A (1100W-2400W)
•Universal IEC
•Hospital-grade IEC connectors
•Dimensions: 68 x 37 x 32 mm/2.7"x15"x1.3"
•Weight: 61g/22oz
Intelligent Ground Control, IEC Connector Ground Loop Remover
100% PRODUK RESMI
100% PRODUK ORIGINAL
GARANSI RESMI
1 TAHUN PT IOT
Ground control to Major components.
The optimum configuration for each system is one Ground/Earth for the whole system. If a system has multiple Grounds/Earths, then it often creates unwanted ground loops. These systems will then have an annoying low-frequency hum (emitted from the speakers).
Current solutions either jeopardise (i) both safety and EMI shielding (e.g. cheater plug), or (ii) EMI shielding. And most are single country (US) uses only.
The GND Defender in the correct way, intelligently detects a ground loop and will cut the ground for that component.
SPECIFICATION
•Al Ground Detection each unit will automatically disconnect the ground on that device
•Ground Safe-auto reinstatement of ground connection to pass current if a fault is detected
•Voltage rating 90-240 volts
•Surge overload rating 220A
•Continuous current rating 10A (1100W-2400W)
•Universal IEC
•Hospital-grade IEC connectors
•Dimensions: 68 x 37 x 32 mm/2.7"x15"x1.3"
•Weight: 61g/22oz
Ada masalah dengan produk ini?