Automotive universal manual hydraulic valve seat pulr

Automotive universal manual hydraulic valve seat pulr
Hub Kami Untuk Menanyakan varian Barang
- Pengiriman pat 6-15 hari sai
Origin : Mainland China
Certification : EPA,FCC,RoHS,TGA


Automotive universal manual hydraulic valve seat pulr pulr hydraulic valve seat ring pulr repair tool pulr pulr new pulr

Pull ran
No.1 pull head: 23-27mm
No.2 pull head: 31-35mm
No.3 pull head: 39-42mm
No.4 pull head: 41-46mm

Precautions
When pulling the seat ring, pase wear goggs and cover the viewing port of the support frame with a thick rag to prevent the seat ring from breaking and hurting peop.
Steps
1. Measure the inner diameter of the valve seat ring and sect a suitab slider and a sufficient ngth of the claw pin shaft
2. Rotate the knurd nut ft and right, and adjust the claw at the lower end of the valve seat ring, or at the joint of the valve seat ring and the cylinder head ''reserve enough spa''
3. Rotate the screw clockwise to open the jaws by the thimb. Make the claw tip come into with the valve seat ring and apply a litt for
5. After the valve seat ring is taken out, it is nessary to open the oil return valve of the jack to make it return to the seat for re-extraction of the seat ring.
6. The height of the lifting seat ring of this tool is 25mm, and the claws must not pull the cylinder cover body when pulling the seat ring, otherwise the claws will be easily