50ml Loctite 277 Thread Locking Agent Anaerobic Adhesive HenOL

50ml Loctite 277 Thread Locking Agent Anaerobic Adhesive HenOL Kami Menyediakan Barang yang Anda Butuhkan - Item tersedia - Buka 24 jam, kec admin lagi ketiduran - Hub Kami Untuk Menanyakan varian Barang - Pengiriman cepat 6-15 hari sampai Certification : None Origin : CN(Origin) DIY Supplies : Metalworking Type : Silicone Sealant is_customized : Yes Model Number : 277 Specification : 50ML color : red Type : high strength, chemical resistance performance Relative density : 1.1 Name: 277 Specification: 50ml color: red Type: high strength, chemical resistance performance Viscosity: 6000/8000mPa.s Average impedance: 32N.m Average damage factor: 32N.m Temperature range: -54/150℃ Speed: 12 hours Recommended accelerator: 7649/7471 Relative density: 1.1 It can be used to lock the cylinder head double-threaded thread. It can be quickly cured, including prying without special surface treatment. It is recommended to produce bolts with a diameter below 1.5 #34; (36mm). Heating and tools are required for disassembly. Instructions Pretreatment: Clean the surface of the assembly to ensure that there is no residual oil stains, such as engine oil, anti-rust oil, etc., and most surfaces have no special pretreatment. For difficult-to-bond substrates, cooperation must be promoted Agent pretreatment. Sizing: Take an appropriate amount of this product and apply it evenly on the surface of the thread. Glue removal: The spilled glue will not solidify, just wipe it off. Disassembly method 1. Disassemble with standard hand tools. 2. In rare cases, the bolts cannot be disassembled at room temperature due to the long mating length. The bolts can be heated locally to 250°C and disassembled while it is hot. 3. Partially heat the HM86989