Atur jumlah dan catatan
Stok Total: 182
Subtotal
Rp500.000
SYSTEM SENSOR 5151 FIXED / ROR / HEAT DETECTOR 5151 + BASE B401 ORIGINAL SYSTEM SENSOR
Rp500.000
Ready stok
Barang yang kami jual
100% Baru
100% Original System sensor
Heat Detector
Merk: System Sensor
Type: 5151
The 5151 thermal detector meets the needs for Applications where rapid response is vital and rapid temperature increases would only be caused by a fire Emergency. The detector initiates an alarm in response to both rapid Rate-of-rise conditions (increases in excess of 15°F per minute) and fixed heat (135°F). This enables the heat Detector to communicate an alarm to the central control panel prior to reaching its fixed set point for high rates of Rise, providing a timely response to both rapid and slow temperature increases.
Height: 50 mm installed in B401 Base
Diameter: 102 mm installed in B401 Base
Weight: 2.8 oz. ( 80 g )
Operating Temperature Range: 0°C to 38°C (32°F to 100°F)
Operating Humidity Range: 10% to 93% Relative Humidity, non-condensing
Operating Voltage: 8.5 to 35VDC
Standby Current: 80µA @ 24VDC
Alarm Current: 10mA Min. 130mA Max. (Must be limited by control panel)
Latching Alarm: Reset by momentary power interruption.
Sensitivity: 57°C (135°F) Fixed or 15°F /min rate-of-rise
Heat Detector ini bisa digunakan atau dipasangkan dengan Master Control Fire Alarm merk apa saja dengan sistem conventional atau semi addressable.
Barang yang kami jual
100% Baru
100% Original System sensor
Heat Detector
Merk: System Sensor
Type: 5151
The 5151 thermal detector meets the needs for Applications where rapid response is vital and rapid temperature increases would only be caused by a fire Emergency. The detector initiates an alarm in response to both rapid Rate-of-rise conditions (increases in excess of 15°F per minute) and fixed heat (135°F). This enables the heat Detector to communicate an alarm to the central control panel prior to reaching its fixed set point for high rates of Rise, providing a timely response to both rapid and slow temperature increases.
Height: 50 mm installed in B401 Base
Diameter: 102 mm installed in B401 Base
Weight: 2.8 oz. ( 80 g )
Operating Temperature Range: 0°C to 38°C (32°F to 100°F)
Operating Humidity Range: 10% to 93% Relative Humidity, non-condensing
Operating Voltage: 8.5 to 35VDC
Standby Current: 80µA @ 24VDC
Alarm Current: 10mA Min. 130mA Max. (Must be limited by control panel)
Latching Alarm: Reset by momentary power interruption.
Sensitivity: 57°C (135°F) Fixed or 15°F /min rate-of-rise
Heat Detector ini bisa digunakan atau dipasangkan dengan Master Control Fire Alarm merk apa saja dengan sistem conventional atau semi addressable.
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan