Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: 100

Subtotal

Rp885.600

Dds Signal Generator Direct Digital Synthesis For Ham Radio Vfo

Rp885.600
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
Hai, Selamat Datang di Toko Kami.

- Kami Menjual Produk-produk Import
- Produk Dikirim dari Luar Negeri.
- Estimasi Kiriman 10-15 Hari. Mohon Menunggu

Model Number : DDS Signal Generator Module
Display Size : 3.0 - 4.9 Inches
DIY Supplies : ELECTRICAL


Certification : NONE
Name : signal generator
Feature : vfo dds
Feature 1 : dds vfo
Feature 2 : ad9850
Feature 3 : dds vfo ham radio
Feature 4 : dds signal generator
Feature 5 : ad9850 dds
Feature 6 : function generator


DDS Signal Generator Direct Digital Synthesis for HAM Radio VFO Wireless Based AD9850 DDS Function Generator Module 0~55MHz

Features :

This is a 0~55MHz DDS Signal Generator. It is based on AD9850 chip and is very easy to operate.

Supports 0~55MHz continual adjust at 1Hz step.

This generator has 78L05 voltage regulate. Input current at 200MA, input voltage 8-9V would be the ideal voltage.

Input voltage of 12V can only be used for short time testing, otherwise will cause heat to board.

5p/6p connect to encoder as per photo. 7p of the middle connects to digital matrix input. 14p (8V GND) is 8V power supply from main board. If powered by main board, DDS does not need independent power supply.

1~6 correspond to 6 frequency bands: (3.8,7 ,9,14,18 or 21,27 or 29)

ISB, USB, CW are the three mode choices.

DT is signal from main board.

Keys & Connection interfaces:

ENC: encoder switch

MEM: switch for memory mode

VFO: Transfer from VFO A to VFO B, or from VFO B to VFO A.

SSB: Working mode change: circulate from USB, LSB, AM, CW, and on and on...

RIT: fine tuning to receiving frequency

CAL: set functions

KB-1 and KB-2 have common shared pin, but is not GND.

How to operate:

Press CAL, power on, then we enter setting screen. Let go/release CAL.

A: ENABLE 6XREFCLE: setting chip clock mode, adjust frequency encoding setting. AD9851 set to 6-multiply frequency, AD9850 set to 1multiply frequency. Press CAL then quickly release to enter next step B.

B: DDS-SYSTEM-CLK: Chip working

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan