Benston Music- Drum elektrik. Set drum elektronik, drum elektronik rumah untuk anak-anak dan pemula, drum elektronik profesional, instrumen perkusi - Putih

Selamat datang di Toko kami :)
MOHON BACA DESKRIPSI TERLEBIH DAHULU Panel Description
1. KIT Button: Enter the kit menu Power off
2. Button: Turn on/off Metronome
3. TEMPO Button: Adjust the metronome tempo
4. – Button: Increase/Decrease parameter
5. + Button: Increase/Decrease parameter
6. DEMO Button: Enter demo song menu
7. REVERB Switch: Turn on effect
8. On Switch: Power on
9. OFF Switch: Power off
10. Output/Headphone volume knob: Control the volume of output and headphone
11. DC jack: Connect 9V adapter
12. AUXIN jack ( 3.5 Stereo jack): Connect input device such as MP3 or cellphone
13. Headphone jack ( 3.5 Stereo jack): Connect to headphone
14. USB: Connect to computer to transfer MIDI signal
15. 6.35 Mono output: Connect to Amplifier
16. PDA: Connect with drum cable
.
Connections
1. Connecting an Audio Equipmen
When using an ampliffer, connect the Output L/MONO jack located on the side of the drum Module.
.
2. Connecting a set of Headphones
phones can be connected to the PHONES jack located on the side of the drum Module.
Note: The headphones output volume is controlled by the VOLUME knob.
.
3. Connecting a MP3 Player
Connect MP3 player or other audio source to the stereo AUX IN jack located on the side of the drum Module.
The input signal is mixed with the drum signal, allowing you to play along.
.
4. Connecting a Computer
the USB Connector, which can receives and transmits MIDI messages to a computer.
.
5. Power Supply & Switch
Make sure the power is switched OFF. Connect the adaptor to the DC IN jack on the side panel. After confirming that all connections have been completed, rotate the volume knob to the left(minimum volume level) before switching the power on. Press power button to turn on the drum, the digit tube will show kit number 001.
.
Power on/off Drum kit: Switch the button to ON location, the LCD will show 001
.
Drum Kit Selection: There are 20 preset kit, check detail at page
1. Press KIT button
2. Press +/- button to choose the kit you prefer
.
Metronome
1. Press L button to start metronome.LCD shows 4-4 (this is the initial beat)
2. Press +/-button, choose the beat you prefer. Beat: 1/2~9/2,1/4~9/4,1/8~9/8
3. Metronome tempo: Press TEMPO button, Press+//-button to adjust the tempo (tempo range: 30-200,the default tempo is 100) All settings in metronome mode will be saved upon power off.
.
Effects
.
Volume control
Turn the knob to control the volume of output and headphone (this knob control both output and headphone volume
Kick option
The inital setting for kick is switch kick, if you want to extend to kick drum pad, please follow below operation:
.
1. Press DEMO button for more than 3 seconds till the LCD shows 501 and demo song start playing.
2.Press+ button to change the number on LCD to 502
3.Then press kit button
4.Turn of the module and turn it on, the module can work with kick drum pad.
.
501:Kick switch
502:Kick drum pad Terimakasih telah mengunjungi Toko kami & Happy Shoping :)