Refrigerant Accumulator Sanhua ACM-P23127-901 Original Akumulator

Refrigerant Accumulator ACM-P23127-901

Accumulator is installed between the suction port of the
refrigerating system compressors and evaporator to separate
gas and fluid, store fluid, return oil and filter.

FEATURES
• INLET AND OUTLET ARE MADE OF COPPER TUBES
SANHUA PRODUCT CATALOGUE
• AIR GUIDING PART DIRECT THE REFRIGERANT TOWARD THE WALL WHICH FROM A SLIPSTREAM TO
MAKE THE REFRIGERANT EXPAND QUICKLY AND SLOW THE FLOW TO LET THE LIQUID DROP DOWN. THIS
EFECTIVELY SEPARATES THE LIQUID AND GAS.
• THE U TUBE DESIGN GUARANTEE A MAX FLOW OF REFRIGERANT AND STOP LITTLE LUBRICATION OIL.
THE INLET OF U TUBE IS BEHIND AIR GUIDING PART WHICH CAN PREVENT THE LIQUID FROM ENTERING
COMPRESSOR. AT THE SAME TIME, IT CAN CHANGE THE DIRECTION OF REFRIGERANT TO COMPLETELY
SEPARATE THE LIQUID AND GAS.
• THE BALANCING HOLE IN THE UPPER U TUBE CAN EFFECTIVELY ELIMINATE THE SIPHON CAUSED THE
RESTART OF SYSTEM SO AS TO AVOID EXCESSIVE LIQUID ENTERING COMPRESSOR.
• THE OIL RETURN HOLE IS MATCHING THE SYSTEM CAPACITY TO OPTIMIZE THE FLOW OF LIQUID
REFRIGERANT AND LUBRICATION OIL INTO COMPRESSOR
• CONNECTION TUBE, U TUBE AND VOLUME OF ACCUMULATOR IS DESIGNED BASED ON THE BASIC DEMAND
OF HEAT PUMP SYSTEM ALLOWS A PROPER AND RELIABLE LIQUID REFRIGERANT AND LUBRICATION OIL
BACK TO COMPRESSOR. THIS COMBINATION IS TO ACHIEVE AMINIMUM PRESSURE DROP AND LARGEST
REFRIGERANT CAPACITY.
• POWER COATED SURFACE CAN SURVIVE 500 HOURS OF SALT SPRAY TEST.
• INCORPORATED FUSE OF 220°C

GENERAL SPECIFICATIONS
• Applicable refrigerant: CFC, HCFC, HFC and HFO
• Applicable medium temperature: -30°C ~+120°C
(22°F~+240°F)
• Applicable ambient temperature: -35°C ~+55°C (22°F~+131°F)
• Maximum working pressure: 2.5MPa
• Certification: UL, CSA and PED