Atur jumlah dan catatan
Stok Total: 300
Subtotal
Rp573.980
For LP156WD1 N156O6 B156RW01 LCD Screen Controller Board 40-Pin LVDS VGA DIY Kit Laptop Monitor 1600*900 HDMI-Compatible 15.6"
Rp573.980
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Brand Name : OPLY
Model Number : HDMI+VGA+LVDS
Origin : Mainland China
Certification : RoHS
Compatible Brand : lenovo
Item Type : Other Notebook Parts
Part Number : S1
Hign-concerned Chemical : None
Supported Resolution : 1600*900
Instructions for purchasing this kit:
1, Before purchasing, Please ensure that your screen model is exactly the same as the model in our list, and that the screen itself can be turned on and displayed normally. If your screen is damaged, please do not place an order as this kit cannot repair and drive damaged screen.
2, If your screen model is not in our product list. Please provide us with the complete screen model to confirm the suitable kit (This is very important, Wrong purchase may lead to unusable). The model label can be found on the back of the screen panel. As shown in the following photo:
3, Power adapter input: DC 12V 3A (DC Port: 2.5MM and 5.5MM inner+ outside-)
Please note: Do not use a power adapter with voltage exceeding 12V, as this will damage the circuit board.
4, This controller board kit is only suitable for LED screen of LVDS 40-Pin signal ports. When the correct signal input is not detected. After about 5 seconds, it will automatically enter standby mode. The indicator light changed from green to red. As shown in the following photo:
5, The kit includes:
1Pcs x Controller motherboard
1Pcs x LVDS signal cable
1Pcs x Keyboard with cable
In addition to the products included in the kit, you may also need the following accessories:
DC 12V 3A Power adapter
Please click here
PH2.0 4-Pin Small speaker
Please click here
Motherboard Protection Box
Please click here
Please note:
that there are two versions of the controller motherboard, with the same functionality. We will configure according to your screen model.
6, Please refer to the photos below for screen cable connections and language settings. (OSD menu has multiple interfaces. If different, please contact us)
7, If you have any problems during the operation. Please feel free to contact us. It's best to provide some photos or videos to help us check the problem. Blind negative evaluation does not solve any problem. Hope we can communicate to solve. Thanks in advance.
Below are photos from buyer feedback. For reference only.
Model Number : HDMI+VGA+LVDS
Origin : Mainland China
Certification : RoHS
Compatible Brand : lenovo
Item Type : Other Notebook Parts
Part Number : S1
Hign-concerned Chemical : None
Supported Resolution : 1600*900
Instructions for purchasing this kit:
1, Before purchasing, Please ensure that your screen model is exactly the same as the model in our list, and that the screen itself can be turned on and displayed normally. If your screen is damaged, please do not place an order as this kit cannot repair and drive damaged screen.
2, If your screen model is not in our product list. Please provide us with the complete screen model to confirm the suitable kit (This is very important, Wrong purchase may lead to unusable). The model label can be found on the back of the screen panel. As shown in the following photo:
3, Power adapter input: DC 12V 3A (DC Port: 2.5MM and 5.5MM inner+ outside-)
Please note: Do not use a power adapter with voltage exceeding 12V, as this will damage the circuit board.
4, This controller board kit is only suitable for LED screen of LVDS 40-Pin signal ports. When the correct signal input is not detected. After about 5 seconds, it will automatically enter standby mode. The indicator light changed from green to red. As shown in the following photo:
5, The kit includes:
1Pcs x Controller motherboard
1Pcs x LVDS signal cable
1Pcs x Keyboard with cable
In addition to the products included in the kit, you may also need the following accessories:
DC 12V 3A Power adapter
Please click here
PH2.0 4-Pin Small speaker
Please click here
Motherboard Protection Box
Please click here
Please note:
that there are two versions of the controller motherboard, with the same functionality. We will configure according to your screen model.
6, Please refer to the photos below for screen cable connections and language settings. (OSD menu has multiple interfaces. If different, please contact us)
7, If you have any problems during the operation. Please feel free to contact us. It's best to provide some photos or videos to help us check the problem. Blind negative evaluation does not solve any problem. Hope we can communicate to solve. Thanks in advance.
Below are photos from buyer feedback. For reference only.
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan