Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: 100

Subtotal

Rp6.900.000

Oscilloscope HANTEK DSO5102P 100MHz 2 ch DSO-5102P Osciloscope Digital

Rp6.900.000
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
- Dikirim dari Jakarta - Bergaransi Jakarta == The Hantek DSO5102P provides you with excellent performance in a compact design. It #39;s loaded with standard features including USB connectivity, automated measurements, limit testing, data loading, and context-sensitive measurement that allow this digital storage oscilloscope to help you get more done in less time. DSO5102P Specifications 100MHz bandwidth 1GSa/s Real Time sample rate Large (7.0-inch) color display, WVGA(800x480) Record length up to 40K Trigger mode: edge/pulse width/line selectable video/slop/overtime etc. USB host and device connectivity, standard (note: USB port is NOT intended to be used to recharge cell phones amp; other usb charged devices. ) Multiple automatic measurements Four math functions, including FFTs standard Provides software for PC real-time analysis Acquisition modes: normal, peak detect, average Inputs coupling: AC, DC, GND Inputs impedance: 1MΩ±2% ‖ 20pF±3pF Probe attenuation: 1X, 10X Supported Probe Attenuation Factor: 1X, 10X, 100X, 1000X Maximum input voltage: CAT I and CAT II: 300VRMS (10×), Installation Category CAT III: 150VRMS (1×) Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur. Sample rate range: 500MS/s--1GS/s Waveform interpolation: (sin x)/x Sample rate and delay time accuracy: ±50ppm(at over any ≥1ms time interval) Position range: 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s Rise time at BNC: 3.5ns Math: +, -, *, /, FFT FFT windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman, 1024 sample point Bandwidth limit: 20MHz Low frequency response: (-3db) gt;≤10Hz at BNC

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan