EnGenius ECB9500

Brand EnGenius Model ECB9500 Operation Mode Client Bridge/Access Point/WDS AP/WDS Bridge/ Client Router/Router/Universal Repeater Standard IEEE 802.11b/g/n Frequency Band 2.4002.484 GHz Antenna 3x Omni-directional external antenna TNC type; Peak Gain=5dBi Security WEP Encryption-64/128 bit WPA Personal (WPA-PSK using TKIP or AES) WPA Enterprise (WPA-EAP using TKIP) 802.1x Authenticator 802.1x Supplicant-MD5/TTLS (CB CR mode) Hide SSID in beacons Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs) in AP mode MAC Filter (AP mode) WLAN L2 isolation (AP mode) Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics) WPA/WPA2 WPA2 Transmitted Power IEEE 802.11n/g 19dBm @ 6~9Mbps / MCS9 18dBm @ 12~18Mbps / MCS11 17dBm @ 24~36Mbps / MCS13 16dBm @ 48~54Mbps / MCS15 IEEE 802.11b 18dBm @ 1~11Mbps Receiver Sensitivity IEEE 802.11n MCS8 @ -91dBm MCS15 @ -74dBm IEEE 802.11g 6Mbps @ -92dBm 54Mbps @ -75dBm IEEE 802.11b 1Mbps @ -93dBm 11Mbps @ -91dBm Interface LAN: One 10/100/1000 Fast EthernetMbps Reset Button Power Jack WPS push button (Wi-Fi Protected Setup) LED Status Power/ Status LAN (10/100/1000Mbps) WLAN (Wireless Connection) Power Requirements Power Supply: 90 to 240 VDC 10% 50/60 Hz (depends on different countries) Active Ethernet (Power over Ethernet, IEE802.3af)- 48 VDC/0.375A Device: 12V/1A Dimension L: 125mm x W: 108mm x H: 31mm Weight 350g pin : D2268656