JMD Handy Baby Auto Key Tool for 4D/46/48/G/King Chip Programmer - Handy Baby III

Handy Baby Key Copy Programmer Data read and write: 1) Read and write 46 chip 1. Please select correct chip mode and password in order to read amp; write chip correctly. The device default chip mode and password is 46 chip blank. 2. Select chip mode: move mouse cursor to #34;Mode #34;, I.E #34;Plaintext mode #34;, press #34;OK #34;, the fonts turn black from white to indicate the selection mode, press #34;Up #34; and #34;Down #34; to select the Plaintext mode or password mode. 3. Enter password: move cursor to the password box under the mode, press #34;OK #34; to proceed, press #34;Up #34; and #34;Down #34; to select the data (0`F), press #34;Left #34; and #34;Right #34; to transfer password. 4. After finish press #34;OK #34;to exit, then move cursor to #34;Read all #34; to read out data. 5. Read all: read out all data for 46 chip and display the status of locked or unlocked. 6. Write: write the corresponding data; make sure 46 unlocked before writing data. 7. Enter data: the way to enter data is as the same as to enter password. 2) Read and write 48 chip 1. Read: read out 48 chip UID, user 1 and user 2 data, and display 48 chip type as well as the status of locked or unlocked. 2. Write: write the corresponding area data; make sure 48 unlocked before writing data. 3. Enter data: move cursor to the data input box, press #34;OK #34; to proceed, press #34;Up #34; and #34;Down #34; to select the data (0`F), press #34;Left #34; and #34;Right #34; to transfer password. After finish press #34;OK #34; button to exit, move cursor to #34;Write #34; to write data. 4. Unlock: if the chip is locked, then it needs to be unlocked before writing into data. 5. Steps: when the chip is read out locked, please enter PIN code which is the code of 48 chip, move cursor to #34;Unlock #34;, press #34;OK #34; to unlock. 3) Read and write 4D chip 1. Read: read out 4D chip password, recognition and ID data, also display their status of unlocked or locked. 2. Enter data: move cursor to the data input box, press #34;OK #34; button to proceed, press #34;Up #34; and #34;Down #34; to select the data (0`F), press #34;Left #34; and #34;Right #34; to tran