Atur jumlah dan catatan
Stok Total: 169
Subtotal
Rp5.038.500
Wire Bending Machine Diy Tool 6th Plus Stainless Steel Mini Universal Bending Bender Manual Upgrade Bender Machine
Rp5.038.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Product Specifications: 350x150x150mm, made of hardened tool steel , to be mounted on a workbench or clamped in a vise for operation.
Product capacity: maximum bending diameter of 10mm wire and 30x3mm (WxT) thin iron sheet
Accessories: with 45# steel mold, bendable circle diameter of
25,30,35,40mm, two angle steel modules, limit pins, limit cups, instructions
SKD-11 die steel shaft pin die diameter 5,6,7,8,9,10,11,12,13-1,13-2(mm)
There are descriptions of various types of bending machines at the end of the listing, and you can choose by comparison.
The 6th Generation
Integrated Jaw Design
More Convenient To Use
Reduce Bending Errors
The 6 PLUS
The overall 304 stainless steel material will not rust,
the hardness of the material is upgraded,
and the service life is longer.
The following shows the differences between different models of bending machines.
You can select the model according to your needs.
Bending capacity comparison
"axb" represents the maximum length and width of flat metal
"C" represents the maximum diameter of the bendable linear metal
“ φ” Represents the inner diameter of the ring that can be made
Unit: mm
Specifications:
Origin: Mainland China
Certification: none
Raw Material: Sheet / Plate Rolling
Product capacity: maximum bending diameter of 10mm wire and 30x3mm (WxT) thin iron sheet
Accessories: with 45# steel mold, bendable circle diameter of
25,30,35,40mm, two angle steel modules, limit pins, limit cups, instructions
SKD-11 die steel shaft pin die diameter 5,6,7,8,9,10,11,12,13-1,13-2(mm)
There are descriptions of various types of bending machines at the end of the listing, and you can choose by comparison.
The 6th Generation
Integrated Jaw Design
More Convenient To Use
Reduce Bending Errors
The 6 PLUS
The overall 304 stainless steel material will not rust,
the hardness of the material is upgraded,
and the service life is longer.
The following shows the differences between different models of bending machines.
You can select the model according to your needs.
Bending capacity comparison
"axb" represents the maximum length and width of flat metal
"C" represents the maximum diameter of the bendable linear metal
“ φ” Represents the inner diameter of the ring that can be made
Unit: mm
Specifications:
Origin: Mainland China
Certification: none
Raw Material: Sheet / Plate Rolling
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan