Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp194.000
GROSIR PRODUK TERBARU!! H4 HID LED Wiring Relay Harness Untuk Lensa Bi-xenon Kabel Proyektor Bi-led Kabel Lampu Rendah Cahaya Tinggi Kabel 2 Lampu Aksesoris Lampu Mobil DIY
Rp194.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
SELAMAT DATANG
H4 HID LED Wiring Relay Harness For Bi-xenon Lens Bi-led Projector Cables High Low Light Wired 2 Lamps Car Light Accessories DIY
Description:
1. The wiring is for 2 pieces of HID/LED High Low beam Relay harness. It can be used with HID or LED lamps, bi-xenon LED projector lens. This Relay Harness has two connectors that connect to either side of your lamp. The purpose is to control the switching of your high and low beam functions.
2. The equipment connects to either side of your vehicle's factory OEM socket and does not require any cutting or trimming, using the OEM connection will allow you to turn your lights on and off as well as high/low overrides using your factory light switch.
Features:
1. Heavy Duty Relay Harness.
2. Low and high beam functionality.
3. 100% water proof, weather proof!
4. Easy to install, just plug and play.
Advanced Relay Control Box.
6. High Quality Garantikan
7. Heat Input: DC 12V
Installation Instructions:
1. Connect the red wire directly to the positive battery pole.
2. Attach the long and short male connectors to the right and left side ballasts. 3. connect the small square cable to the HID lamp.
4. Attach the last single female connector to one of your car/truck's freight light connectors.
Caution: The red wire is connected to the battery positive pole and the two black wires to the negative pole & ground individually.
Package Includes:
1pc x H4 Wiring Harness for 2 Light
H4 HID LED Wiring Relay Harness For Bi-xenon Lens Bi-led Projector Cables High Low Light Wired 2 Lamps Car Light Accessories DIY
Description:
1. The wiring is for 2 pieces of HID/LED High Low beam Relay harness. It can be used with HID or LED lamps, bi-xenon LED projector lens. This Relay Harness has two connectors that connect to either side of your lamp. The purpose is to control the switching of your high and low beam functions.
2. The equipment connects to either side of your vehicle's factory OEM socket and does not require any cutting or trimming, using the OEM connection will allow you to turn your lights on and off as well as high/low overrides using your factory light switch.
Features:
1. Heavy Duty Relay Harness.
2. Low and high beam functionality.
3. 100% water proof, weather proof!
4. Easy to install, just plug and play.
Advanced Relay Control Box.
6. High Quality Garantikan
7. Heat Input: DC 12V
Installation Instructions:
1. Connect the red wire directly to the positive battery pole.
2. Attach the long and short male connectors to the right and left side ballasts. 3. connect the small square cable to the HID lamp.
4. Attach the last single female connector to one of your car/truck's freight light connectors.
Caution: The red wire is connected to the battery positive pole and the two black wires to the negative pole & ground individually.
Package Includes:
1pc x H4 Wiring Harness for 2 Light
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan