Ceilling DC 12V-24V 5.8GHz Microwave Radar Sensor Body Motion HF Detector Light Switch Dry contact output

Brand Name : ESUMZ
Model Number : p008
Material : Polymer
Usage : vibration sensor
Output : Switching Transducer
Origin : Mainland China
Theory : Inductance Sensor
Type : Biosensor
is_customized : Yes


Product introduction SK-701K-DC is an active motion detector with adjustable sensitivity, daylight detection and time setting. Its based Doppler principle and RADAR technology, adopting rod antenna & high performance micro-chip. It is easy to install, provide high probability of detection, low nuisance alarms and resistance to rain, fog, wind, dust, falling snow and temperature extremes
Specification:

Power sourcing: 12-24V/DC

Power frequency:

5.8GHz +/-75MHz

Ambient light:

10~2000LUX

(Adjustable)

Time-dely:

10sec-5min

Rated load:

7A (Max)

(incandescent lamp)

Detection distance:

2-10 meters

(Adjustable)

Detecction range: 360

Working temperature: -20~+40

Working humidity: <93%RH

Installing height:

Max. 3.5 m

Power consumption: 0.45 (work)0.1W(static)

Detection motion speed: 0.6~1.5m/s

Note: the high-frequency output of this sensor is <0.2mW that is just one of the transmission power of a mobile phone

4. Installation procedure 4.1 Take down the top cover by turning it anti-clockwise (see fig.1), 4.2 Hold base against the wall and mark drill holes, paying attention to any existing wiring in the wall 4.3 Drill the holes, insert wall plug (6mm dia.) 4.4 Put the power wire and load wire through the base holes 4.5 Screw the base into place (see fig.2) 4.6 Connect the mains power supply and the load wire to the connection terminal according to connection-wire mark 4.7 Fit glass shad and turn it clockwise (see fig.2)