Atur jumlah dan catatan
Stok Total: 73
Subtotal
Rp822.000
For B156HAN08.0/2/3/4 Laptop Monitor LCD Controller Driver Board Micro USB 1920*1080 40 Pin EDP Mini-HDMI DIY Kit 15.6"
Rp822.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Welcome To Our Store
Kami Adalah Sumber Tangan Pertama, Penjualan Skala Besar, Harga Eceran Sama Dengan Harga Grosir
Brand Name : OPLY
Model Number : Mini-HDMI EDP
Origin : Mainland China
Certification : RoHS
Compatible Brand : HUAWEI
Item Type : Other Notebook Parts
Part Number : S2
Hign-concerned Chemical : None
Supported Screen Size : 15.6 inch
Instructions for purchasing this kit:
1, Before purchasing, Please ensure that your screen model is exactly the same as the model in our list, and that the screen itself can be turned on and displayed normally. If your screen is damaged, please do not place an order as this kit cannot repair and drive damaged screen.
2, If your screen model is not in our product list. Please provide us with the complete screen model to confirm the suitable kit (This is very important, Wrong purchase may lead to unusable). The model label can be found on the back of the screen panel. As shown in the following photo:
3, Power adapter input: DC 5V 2A (via Micro USB input) or DC 12V 3A (DC Port: 1.35MM and 3.5MM inner+ outside-)
Please note: Do not use a power adapter with voltage exceeding 12V, as this will damage the circuit board.
4, This controller board kit is only suitable for LED screen of EDP 40-Pin signal ports (Support 60-100Hz Refresh rate, but some screens may flicker when exceeding 100Hz. If you have special requirements for Refresh rate, please consider carefully).When the correct signal input is not detected. After about 1 minute, it will automatically enter standby mode. The indicator light changed from green to red. As shown in the following photo:
5, The kit includes:
1Pcs x Controller motherboard
1Pcs x EDP 40-Pin signal cable
1Pcs x Keyboard with cable
In addition to the products included in the kit, you may also need the following accessories:
DC 12V 3A Power adapter
Please click here
PH1.25 4-Pin Small speaker
Please click here
Motherboard Protection Box
Please click here
Mini-HDMI To Standard-HDMI Signal Cable
Please click here
6, Please refer to the photos below for screen cable connections and language settings. (OSD menu has multiple interfaces. If different, please contact us)
7, If you have any problems during the operation. Please feel free to contact us. It's best to provide some photos or videos to help us check the problem. Blind negative evaluation does not solve any problem. Hope we can communicate to solve. Thanks in advance.
Below are photos from buyer feedback. For reference only.
Contact Us Before Order
#Sebelum membeli suatu produk, Mohon dapat membaca deskripsi produk dengan cermat
#Harap tanyakan stok sebelum melakukan pemesanan ya kak
#Jika Anda memiliki pertanyaan, silakan hubungi kami.
Kami Adalah Sumber Tangan Pertama, Penjualan Skala Besar, Harga Eceran Sama Dengan Harga Grosir
Brand Name : OPLY
Model Number : Mini-HDMI EDP
Origin : Mainland China
Certification : RoHS
Compatible Brand : HUAWEI
Item Type : Other Notebook Parts
Part Number : S2
Hign-concerned Chemical : None
Supported Screen Size : 15.6 inch
Instructions for purchasing this kit:
1, Before purchasing, Please ensure that your screen model is exactly the same as the model in our list, and that the screen itself can be turned on and displayed normally. If your screen is damaged, please do not place an order as this kit cannot repair and drive damaged screen.
2, If your screen model is not in our product list. Please provide us with the complete screen model to confirm the suitable kit (This is very important, Wrong purchase may lead to unusable). The model label can be found on the back of the screen panel. As shown in the following photo:
3, Power adapter input: DC 5V 2A (via Micro USB input) or DC 12V 3A (DC Port: 1.35MM and 3.5MM inner+ outside-)
Please note: Do not use a power adapter with voltage exceeding 12V, as this will damage the circuit board.
4, This controller board kit is only suitable for LED screen of EDP 40-Pin signal ports (Support 60-100Hz Refresh rate, but some screens may flicker when exceeding 100Hz. If you have special requirements for Refresh rate, please consider carefully).When the correct signal input is not detected. After about 1 minute, it will automatically enter standby mode. The indicator light changed from green to red. As shown in the following photo:
5, The kit includes:
1Pcs x Controller motherboard
1Pcs x EDP 40-Pin signal cable
1Pcs x Keyboard with cable
In addition to the products included in the kit, you may also need the following accessories:
DC 12V 3A Power adapter
Please click here
PH1.25 4-Pin Small speaker
Please click here
Motherboard Protection Box
Please click here
Mini-HDMI To Standard-HDMI Signal Cable
Please click here
6, Please refer to the photos below for screen cable connections and language settings. (OSD menu has multiple interfaces. If different, please contact us)
7, If you have any problems during the operation. Please feel free to contact us. It's best to provide some photos or videos to help us check the problem. Blind negative evaluation does not solve any problem. Hope we can communicate to solve. Thanks in advance.
Below are photos from buyer feedback. For reference only.
Contact Us Before Order
#Sebelum membeli suatu produk, Mohon dapat membaca deskripsi produk dengan cermat
#Harap tanyakan stok sebelum melakukan pemesanan ya kak
#Jika Anda memiliki pertanyaan, silakan hubungi kami.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan