30cm/60cm Plastic Acrylic Bending Machine PVC Organic Sheet Heater Angle Regulator Water-Cooled Bending Device Bracket Plate

SELAMAT DATANG DI TOKOKAMI
memiliki masa pengemasan yang lebih lama, yaitu tiga hari atau lebih. Produk Pre-order umumnya adalah produk custom atau produk yang membutuhkan penanganan khusus.

Model Number : Bending Machine
Origin : Mainland China
Certification : none
Machine Type : hot bending machine
Automation : Manual
Extra Services : Heat Treating
Material / Metal Processed : PVC
Raw Material : Pipe
Power : Cnc
Is Smart Device : no
Hign-concerned Chemical : none
keyword 02 : Angle-fixing


Place An Order With A Coupon Enjoy Discount Benefits.

1250mm is also available and if you need it, please feel free to contact our customer service for more detailed information.

All Hot Bending Machines Come With A Spare Heating Wire.

Warm note: Because the heating tube is a glass product, it is easy to be damaged during transportation, we specially bring a spare heating wire, if one of them is damaged during transportation, it will not be replaced ~ please know.

Name: Acrylic bending machine

Heating length: 300MM

Rationale: Thermoforming (infrared heating)

Power: 300W

Applicable: Acrylic, Plexiglass, PC\ABS\PP and other plastic sheet suitable

Name: Acrylic bending machine

Heating length: 600MM

Rationale: Thermoforming (infrared heating)

Power: 800W

Applicable: Acrylic, Plexiglass, PC\ABS\PP and other plastic sheet suitable
Application Scenario

Acrylic hot bending machine is increasingly widely used in the decoration hall, the bottom of the billboard, including square columns, column doors, side doors and Windows, display cabinets, supermarket shelves, walls, light boxes, etc. Acrylic bending machine is needed

Triangular plug, interlocking safety leakage protection! The chance of short circuit is greatly reduced

Symmetrical multi-grid heat dissipation around the high power thermostat effective 0-85 adjustable general material 60-70 degrees.

Equipped with high temperature water pump (1.8/2.5m than 1.25m and more power)

Imported silicone water pipe (2mm thick)

Infrared Heating

Vacuum carbon fiber Explosion-proof glass tube Uniformly heated

Water Circulation Cooling

Adopt industrial grade High temperature resistant silicone tube Not easily deformed by heat
Temperature Regulator

According to the thickness of the plate Adjust the temperature of the subbender
Plug Design

2-head application
ABS engineering plastic plug
It has a heat warning on it
Length Locator

Adjust the length of the baffle as required, up to 240mm. When mass production, the length positioning makes the bending parts of the acrylic plate the same.
Angle Positioner

Adjust the Angle between the baffle and the back of the machine according to the demand, the Angle can be adjusted to a maximum of 160

The first step: Prepare a cooling box (bucket) of more than 30 liters, and first the main body of the heater and the submersible pump Connect with silicone grease hose, place submersible pump in cooling bucket, connect pump power supply, wait for water Circulation out. (Note: The water temperature of the machine will continue to rise for a long time, please change the cold water. The circulating water temperature should not drop sharply, and the power supply of the heater should be cut off in time when the water temperature exceeds 50 degrees, and then later Change the circulating water)
Step 2: Connect the thermostat to the hot bending machine and then access 220V mains power, adjust the thermostat controller knob,The clockwise direction is heating up, and the reverse is cooling down, and it should not be rotated too fast when adjusting, so as not to damage the temperature regulation Components. (Note: It is appropriate to slowly adjust the thermostat until the heat pipe is slightly red, and too high a temperature will cause heat Bending material damage and affect the service life of the hot bending machine)
Step 3: When the heating tube reaches the required temperature, the plastic plate that needs to be hot bent can be placed on the heating tank.When the plate is baked soft until it can be bent by hand, it can be bent at various angles. Unlike the data,The setting time varies. Please determine the setting time according to the actual situation.

Safety precautions:

Product heating produces high temperature, heating components should avoid contact with human skin.

Please pay attention to the use of environment, away from flammable and explosive materials.

If not used for a long time, cut off the power supply in time

REAL PIC 100% BARANG SESUAI GAMBAR*** HIGH QUALITY BARANG PREMIUM***
HAPPY SHOPING