Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp281.000
GASSKEN RushFPV GPS Mini M10 Inav - Betaflight - Arduino - Raspberry
Rp281.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
A compact navigation module designed for small FPV carriees.
The new uBlox M10 engine supports GPS, BDS, GLONASS and GALILEO system navigation, and can connect three of them at the same time with a refresh rate of up to 10Hz.
Built-in backup battery and memory, support fast hot start. the antenna has an anti-fouling coating, and the circuit part is sealed, reliable and durable.
Specification :
Receive Frequency Band : GPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1
Receiving Channel : 72CH
Receiving Sensitivity : - 162dBm
Output Protocol : Ublox / NMEA
Output Refresh Rate : 1HZ-10HZ
Baud Rate : 115200dps
Power Input : 5V 30mA
Speed Accuracy : 0.05m/s
Positioning Accuracy : 2D ACC 1.5m
Size : 18x18x4.8mm
Weight : 4.2g
Precautions
Please keep the top of the ceramic antenna unobstructed and avoid close to metal and carbon fiber. For the best reception, please use the bracket to install the GNSS antenna in a clear place, and keep it as far away as possible from the VTX and R/C receiver antenna.
when connecting to FC, Please connect the RX of the GNSS module to FC TX, and the TX of the module to FC RX. The antenna is fragile, please do not hit ot drop it.
The engraving marks on the center frequency to improve the performance of the antenna, and are not product defects
The new uBlox M10 engine supports GPS, BDS, GLONASS and GALILEO system navigation, and can connect three of them at the same time with a refresh rate of up to 10Hz.
Built-in backup battery and memory, support fast hot start. the antenna has an anti-fouling coating, and the circuit part is sealed, reliable and durable.
Specification :
Receive Frequency Band : GPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1
Receiving Channel : 72CH
Receiving Sensitivity : - 162dBm
Output Protocol : Ublox / NMEA
Output Refresh Rate : 1HZ-10HZ
Baud Rate : 115200dps
Power Input : 5V 30mA
Speed Accuracy : 0.05m/s
Positioning Accuracy : 2D ACC 1.5m
Size : 18x18x4.8mm
Weight : 4.2g
Precautions
Please keep the top of the ceramic antenna unobstructed and avoid close to metal and carbon fiber. For the best reception, please use the bracket to install the GNSS antenna in a clear place, and keep it as far away as possible from the VTX and R/C receiver antenna.
when connecting to FC, Please connect the RX of the GNSS module to FC TX, and the TX of the module to FC RX. The antenna is fragile, please do not hit ot drop it.
The engraving marks on the center frequency to improve the performance of the antenna, and are not product defects
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan