Baru JKBMS Active Balance Bms 8S 12S 13S 14S 16S 17S 20S 24S Smart Bms 60A 80A 100A 150A 200A 600A Lifepo4 Li-Ion Lto Battery

JKBMS Active Balance Bms 8S 12S 13S 14S 16S 17S 20S 24S Smart Bms 60A 80A 100A 150A 200A 600A Lifepo4 Li-Ion Lto Battery


Sebelum order mohon dibaca rincian pd deskripsi :)



- Barang dikirim langsung dr Luar Negeri

- Estimasi pengiriman 15 Harian Sampai Alamat

- harga yang dipajang sudah full payment tapi sewaktu- waktu harga bisa saja berubah berdasarkan ketentuan cukai !!

- Packing Safety, Seller Amanah :)

- Jaminan uang kembali jika barang diterima tidak sesuai !!!
Package
BMS{Bluetooth bulit-in}
* Temperature sensor(40cm)


* Balance Wires(75cm)


* Active Switch(15cm)


*Heating cable(Only for BMS With Heat Function)


H:BMS With Heat Function
C:BMS With CANBUS chip Bulit-in



NOTE:
For instructions on heating cables,
the green 5PIN cable of the heating cable needs to be linked to the heating pad,
and the rest of the black and red cables are linked to the smart charger
(after the smart charger links the BMS,
it detects the temperature of the battery through the BMS,
which automatically monitors the charging status of the battery)


Heat Function interface


Description of heating function:
Battery temperature is below low temperature charge protection, turn off charging, turn on heating.

Cryogenic charge protection is a parameter that can be set within APP

The heating power depends on the battery voltage and the resistance value of the heating film.

Battery voltage U.

Heating resistance R.

Power equals U*U/R

Heating current I=U/R;

The maximum I (current) of the board design is 3A.

MAX heating power 200W(100W OF B2A8S20P).





Pls buy the accessory from the following link.


https://www..com/item/1005004233638105.html





Bluetooth link for Phone-JK BMS
Download link-IOS :
Search (
JK BMS
) in the APP STORE
Download link-Andriod :
Search (
JK BMS
) in the Google STORE










NOTE:
①:Temperature sensor
②:RS485 interface(At present, all JK BMS are configured with RS485 function by default)
③:LCD interface(At present, all JK BMS are configured with LCD interface by default)
④:Heat Function interface(At present, the heating function customized by customers can be accepted)
⑤:CANBUS interface ( Needs customized)


































NOTICE:

Protection (Current Sensor Anomaly)

This problem exists when the inverter is used, because the current direction is uncertain,
The alarm will be displayed. It does not affect the normal use of BMS.
This kind of alarm will appear when the sun i