Loctite 601 603 609 620 638 640 641 648 680 Cylindrical Parts Holding

Application Materials : Metal
is_customized : No
Model Number : NOW601/620/603/638/641/640
Origin : Mainland China
Certification : none
Type : Caulk
Brand : loctite
Color : Green
Packaging : New packaging 50ml/250ml
Features:
Loctite 601
Purpose: High strength, low viscosity, suitable for small clearance.
Viscosity: 100/150 (mpa) s)
Capacity: 50 ml
Color: Green
Maximum filling clearance (mm):0.1
Shear Strength (PSI):3700
Curing speed (25 ):24 hours
Relative density :1.1
A general purpose high strength holding adhesive with oil and other contaminants. Seals and holds the cylindrical part assembly with a maximum filling diameter clearance of 0.13mm. The initial curing within 30 minutes can prevent micro-vibration wear and crack corrosion between metal matches.
-Loctite 603
Packing specification: 50ml
Color: green
Viscosity: 100/150 m pa.s
Maximum filling gap: 0.127mm
Shear strength steel / steel: 3770PSI *
Curing speed: 10 minutes / 24 hours
Recommended accelerator: 7649/7471
Relative density: 1.1
Typical use: oil resistance and low viscosity, suitable for occasions with small clearance and interference fit, suitable for fit clearance below 0.13MM Of cylindrical parts. It can be used in the environment with oily residue to effectively prevent micro-vibration wear and corrosion in metal assembly operations.
-Loctite 609
Packing specification: 50ml
Color: green
Viscosity: 100/140 mpa.s
Maximum filling gap: 0.127mm
Shear strength steel / steel: 2290PSI *
Curing speed: 10 minutes / 24 hours
Recommended accelerator: 7649/7471
Relative density: 1.1
Typical uses: high strength, used for bonding cylindrical fittings, including for holding rotors and shafts in low-power motors and micro-motors. Lock the bushing and bushing, improve the fit strength of the press fit, and repair the worn hole-shaft fittings or out-of-tolerance parts.
-Loctite 620
Product