HANDY TALKY ICOM IC T70A DUAL BAND

Specifications General Frequency range (unit: MHz) Tx Rx 144-148, 420-450*1 136-174, 400-479*1 *1guaranteed 144-148 MHz, 440-450 MHz Type of emissions F2D/F3E (FM) Number of memory ch. 302 (incl. 50 scan edges and 2 call) Antenna impedance 50 (SMA) Power supply External DC power Battery cells 7.2V DC (with BP-264) 10-16V DC 6-10V DC Frequency stability 2.5 ppm -20C to +60C basis of 25C Current drain (at 7.2V DC or 13.5V DC) (VHF/UHF, typical) Tx Rx High (UHF/VHF) Max. audio Stand-by Power saved 1.7 A/2.1 A typical Less than 450mA (internal SP, 16) Less than 300mA (External Sp, 8) Less than 90mA Less than 40mA (1:8 duty) Operating temperature range -20C to +60C -4F to +140F Dimensions (projections not included) 58(W) 111(H) 30(D) mm 2932(W) 438(H) 1316(D) in Weight 380g; 13.4oz (with BP-264 and Ant.) Transmitter Output power (at 7.2 V DC) 5.0W/2.5W/0.5W (high/mid/low) Spurious emissions Less than -60 dBc (high/mid) Less than -13dBm (low) Max. freq. deviation 5 kHz/2.5 kHz (wide/narrow) Ext. MIC connector 3-conductor 2.5(d) mm (110)/2.2k Receiver Sensitivity (at 12dB SINAD) 0.18 V (guaranteed range) Squelch sensitivity (at threshold) 0.18 V typical Selectivity FM FM narrow More than 60dB Less than 60dB Spurious and Image rejection ratio More than 60dB (VHF) Audio output power (at 10% distortion) More than 700mW (internal SP, 16 More than 400mQ (external SP, 8 Ext. SP connector 3-connector 3.5 (d) mm (18)/8 Applicable U.S. Military Specifications and IP Rating Standard MIL 810F Method Proc. Temp. Shock 503.4 I Rain 506.4 I, III Vibration 514.4 I Shock 516.5 I, IV Also meets equivalent MIL-STD-810-C, -D and -E. Other test categories are now under evaluation. Ingress Protection Standard Dust and Water IP54 (dust-protection and water resistant) All stated specifications are subject to change without notice or obligation. Supplied Accessories Antenna, FA-S270C Belt clip, MB-124 Battery pack, BP-265 Rapid charger, BC-193 Hand strap