Module Wifi NodeMCU V3 Lolin Lua Wifi EPS8266 VH340 IOT Arduino

NodeMCU v3 Lolin LUA WiFi CH340 ESP8266 IoT adalah Stand alone wifi development board yg memudahkan kita dalam mempelajari dan mengembangkan project Internet of Things (IoT).

Board ini dapat digunakan secara stand alone atau dgn arduino. Kompatibel dengan Arduino dan NodeMcu.

Board LOLIN ini ukurannya lebih besar dari yang versi DOIT

Spesifikasi:
- Uses CH340G instead of CP2102.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
- Communication interface voltage: 3.3V.
- Antenna type: Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD0: 1 channel ADC
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature: -40 ~ + 125
- Drive Type: Dual high-power H-bridge driver
- Flash size: 4MByte
- Dimension: 30 x 60mm