HPE JL808A Aruba Instant On 1960 48G 2XGT 2SFP+ Switch

HPE JL808A Aruba Instant On 1960 48G 2XGT 2SFP+ Switch


Specification :

I/O ports and slots :
- 48 RJ-45 autosensing 10/100/1000 Mbps ports

- (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

- 2 SFP+ 10GbE ports 2 10GBASE-T ports

Dimensions : 350.5(d) x 442.5(w) x 43.95(h) mm
Weight : 9.8 lb (4.4 kg)

Processor and Memory :
Single-Core ARM v7 Cortex-A9 @800MHz; 1GB DDR3; 512MB NAND flash; Packet buffer size: 1.5 MB

Performance :
100 Mb Latency ; < 4.4 uSec
1000 Mb Latency : < 2.2 uSec
10000 Mb Latency : < 1.1 uSec
Throughput (Mpps) : 131 Mpps
Capacity : 176 Gbps
Routing Table size (# of static entries) : 32 IPv4/IPv6
MAC Address table size (# of entries) : 16,000 entries
Reliability MTBF (years) : 109.4

Operating temperature : 0-40°C, 0-10,000 ft

Acoustics : LWAd = 2.9 Bel


Frequency : 50Hz/60Hz
AC voltage : 100-127VAC / 200-240VAC
Current : 1.1A/0.4A
Maximum power rating : 100-127V: 110W 200-220V: 120W
Idle power : 100-127V: 60W 200-220V: 80W
PoE power : -
Power Supply : Internal power supply


Device Management : Aruba Instant On Cloud; Web browser; SNMP Manager

Mounting :
- Mounts in an EIAstandard 19 in. telco rack or equipment cabinet. 2-post rack kit included
- Supports table-top mounting
- Supports rack-mounting
- Supports wall-mounting with ports facing either up or down
- Supports under-table mounting using the brackets provided