Flame Detector Explosion-proof UV Ultraviolet ATEX approved ASENWARE

The Explosion-Proof Point-Type UV flame detector AW-FD706E-UV has high sensitivity to monitor early flame of ultraviolet radiation, can provide rapid alarm response to most flames, and it has reliable self-diagnosis and excellent explosion-proof performance. It is well applied in the dangerous places where flames are easy to occur quickly.

Built-in high-speed,low-power, high-performance 32-bit high-precision data processing chip;
Adopt fast response type ultraviolet optical sensor; The small fire can be detected earlier;
The detection distance is 35 meters (0.33m*0.33m*0.05m n-heptane fire)
The perfect algorithm best combines the flame detection and false alarm capabilities;
The detector is suitable for a variety of fuels;
Suitable for heavy industry applications;
Low maintenance cost, easy to upgrade and improve.

Model AW-FD706EX
Spectrum Range UV 185-260nm
Detection angle 120°
Main Voltage 24VDC(18~30VDC)
Working current Alarm:≤50mA
Relay Output Fire alarm relay ， 1A@30VDC.
Fault relay ，1A@30VDC.
Signal output Relay type 2 fire alarm and fault relay output
Ex-Atex Protection Level Exd II C T6 Gb/tD A21 IP66 T80°C
Protection class IP66 / IP67
Operation method Infrared remote control
Reset method Power off reset, Communication protocol reset, Remote control reset
Environmental Temperature range: -40℃～70℃
Storage temperature range:(-40~-85°F)
Humidity: 0～96%RH (non-condensing) can withstand 100% condensing humidity for a short time
Electrical Interface 1×3/4NPT,M25*1.5,G3/4, optional
Size 120mm* 95mm* 85mm
Accessories Cast aluminum bracket
Weight about 0.7kg