Toa System Ampli VM 2120 ( 120 watt ) VM2120 Best

Power Source AC 230 V
DC 24 V/7.5 A
Applicable cable diameter AWG22 - AWG14
Power Consumption on AC Mains With no signal present 37 W
Under normal operating conditions according to
EN 8 sec. W
With rated output signal 201 W
Current Consumption on 24 V DC Power Input With no signal present 0.7 A
Under normal operating conditions according to
EN 8 sec. 4.2 2.1 A
With rated output signal 5.2 A
Rated Output 120 W
Output Voltage /Impedance 100 V/83 Ω
(selectable by the internal wiring change)
Frequency Response 50 Hz - 16 kHz
Distortion 1 % or less
Signal-to-Noise Ratio 60 dB or more
Tone Control Bass 100 Hz ±10 dB
(Inputs 1 - 3 and BGM individually adjustable.)
Remote Microphone /Expansion Amplifier Connection 2 RJ45 female connectors for connecting the RM-200M Remote
Microphone and the VM-2120 or VM-2240 unit used as an
expansion amplifier.
Maximum distance 800 m (874.89 yd) in total
Link cable Category 5 Shielded
Number of connectable RM-200Ms Up to 4
Twisted-Pair straight cable (TIA/EIA-568A standard)
Input Inputs 1 - 3 -60 dB(*3) (MIC)/-10 dB(*3) (LINE) (changeable)
600 Ω
combined XLR connector (female)/phone jack
(Only Input 1 is additionally equipped with DIN
connector(*5).)
Telephone paging input Push-in terminal block(*6)
Voice sound -10 dB(*3)
balanced input with shield terminal(*4)
Control No-voltage make input
open voltage 3.3 V DC
short-circuit current under 1 mA
BGM 1 - 2 -20 dB(*3)
Power amplifier input 0 dB(*3)
External speaker input 100 V
(This input is selected when the Units
broadcast cutoff control is activated.)
Output Speaker output Plug-in screw connector(*7)
5-zone selector with attenuator (all zones simultaneously
selectable)
Direct speaker output Direct output from the power amplifier
output transformer (attenuator bypassed)
Plug-in screw connector(*7)
output 0 dB(*3)
Recording output 0 dB(*3)
Preamplifier output 0 dB(*3)
Control Input For controlling Inputs 1