Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp1.445.000
SEPATU PEMADAM HARVIK / FIRE FIGHTER HARVIK
Rp1.445.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: BAJU PEMADAM
HARVIK Fire Fighting Boot (Art. No: 9687L)
Brand : Harvik - - Flame retardant rubber outsole. Fuel oil resistant sole suitable for inimical environment. Slip resistant vulcanized rubber outsole. Non-corrosive stainless steel. Epoxy coated toe caps. High visibility with black and yellow contrast. Waterproof. Reinforced rubber. Meets EN ISO 20345 impact and compression tests.
Colour Black/Yellow
Saiz Range : 38 - 43
Type of construction : Vulcanized Rubber Upper and Sole
Compliance
European Standard, CE Approved - EN 345-2:1996
(SP-FP-E-HRO-CI), A29 also available on art 9687L
CSA Z195-02 - Canadian Standards Association
ANSI - American National Standard Z41PT99
Malaysian Standard, MS EN 345: 1988 (SB-P-E-HRO)
Air pressure applied for water leakage testing: 50kPa
Lining Material
Leg Lining : Woven Cotton Canvas
Weight (min) 250g/m, Thickness (min) 0.60mm
Insole Lining : Woven Sheeting
Weight (min) 130g/m, Thickness (min) 0.30mm
Rubber Components
Upper : Black in Colour, 65% Natural Rubber, 30% Styrene
Butadiene Rubber and 5% Chloroprene Rubber
Foxing : Yellow in Colour, 65% Natural Rubber, 30% Styrene
Butadiene Rubber and 5% Chloroprene Rubber
Thickness of Upper and Fabric : Combined 1.80mm (Minimum)
Sole / Heel
Black in Colour, 70% Chloroprene Rubber, 20% Nitrile Rubber &
10% Natural Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22C) 12% max
change in volume
Abrasion Resistant - DIN 53516 : 250mm max
Hardness Shore A : 65 5
Outsole Pattern : NJV, Black Moulded Sole
Sole Protection
Eletric Shock Resistant - Meets CSA-Z195-02,
Resistance to Hot Contact - Meets both NFPA and EN 345-2,
Energy absorption - Meets EN 345-2
Steel Midsole : One piece Stainless Steel, Meets CSA-Z195-02 Sole Penetration and EN 345 Flexing test
Ready stock
Brand : Harvik - - Flame retardant rubber outsole. Fuel oil resistant sole suitable for inimical environment. Slip resistant vulcanized rubber outsole. Non-corrosive stainless steel. Epoxy coated toe caps. High visibility with black and yellow contrast. Waterproof. Reinforced rubber. Meets EN ISO 20345 impact and compression tests.
Colour Black/Yellow
Saiz Range : 38 - 43
Type of construction : Vulcanized Rubber Upper and Sole
Compliance
European Standard, CE Approved - EN 345-2:1996
(SP-FP-E-HRO-CI), A29 also available on art 9687L
CSA Z195-02 - Canadian Standards Association
ANSI - American National Standard Z41PT99
Malaysian Standard, MS EN 345: 1988 (SB-P-E-HRO)
Air pressure applied for water leakage testing: 50kPa
Lining Material
Leg Lining : Woven Cotton Canvas
Weight (min) 250g/m, Thickness (min) 0.60mm
Insole Lining : Woven Sheeting
Weight (min) 130g/m, Thickness (min) 0.30mm
Rubber Components
Upper : Black in Colour, 65% Natural Rubber, 30% Styrene
Butadiene Rubber and 5% Chloroprene Rubber
Foxing : Yellow in Colour, 65% Natural Rubber, 30% Styrene
Butadiene Rubber and 5% Chloroprene Rubber
Thickness of Upper and Fabric : Combined 1.80mm (Minimum)
Sole / Heel
Black in Colour, 70% Chloroprene Rubber, 20% Nitrile Rubber &
10% Natural Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22C) 12% max
change in volume
Abrasion Resistant - DIN 53516 : 250mm max
Hardness Shore A : 65 5
Outsole Pattern : NJV, Black Moulded Sole
Sole Protection
Eletric Shock Resistant - Meets CSA-Z195-02,
Resistance to Hot Contact - Meets both NFPA and EN 345-2,
Energy absorption - Meets EN 345-2
Steel Midsole : One piece Stainless Steel, Meets CSA-Z195-02 Sole Penetration and EN 345 Flexing test
Ready stock
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan