Fluke 787B Process Meter

Fluke 787B Process Meter

DMM and Loop Calibrator in one tool
* Precision 1000V, 440 mA digital multimeter
* 20 mA Current source / simulator
* Measure current to 3 mA with 0.05% accuracy and 1 uA resolution
* Ohm, Continuity Beeper, Diode Test, Frequency

Measurement function
V dc: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V , Accuracy : 0.1% + 1
V ac (true-rms): 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V Accuracy : 0.7% + 2
mA dc: 30.000 mA , Accuracy 05% + 2
A dc: 1.000 A (0.440 A continuous) Accuracy 0.2% + 2
A ac: 1.000 A (0.440 A continuous) Accuracy 1% + 2
Resistance: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M Accuracy 0.2% + 1
Frequency (0.5 Hz to 20 kHz) 199.99 Hz, 1999.9 Hz, 19.999 kHz .Accuracy 005% + 1
Diode test 2.000 V (shows diode voltage drop) Accuracy 2% + 1
Continuity Beeps for resistance < approx. 100 ohms

Output function
DC current output (Internal battery operation):
0.000 to 20.000 mA or 4.000 to 20.000 mA,
(selectable at power-up) Over-range to 24.000 mA
Drive Capability 24 V compliance or, 1,200 ohms, @ 20 mA
Accuracy : 0.05%

DC current simulate (Ext. 15 V to 48 V loop supply):
0.000 to 20.000 mA or 4.000 to 20.000 mA,
(selectable at power-up) Over-range to 24.000 mA
Drive capability 1000 ohms, @ 20 mA
Accuracy 0.05%

Current adjustment modes
Manual: Coarse, Fine, 25% and 100% step
Automatic: Slow Ramp, Fast Ramp, 25% step
Temperature range of 18 °C to 28 °C, for one year after calibration

Safety IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V
Size (HxWxL) 50 x 100 x 203 mm

Accessories included ( Termasuk )
* TL71 Premium test lead set
* AC72 Alligator clips
* Four AA Batere (1,5 Volt ) 4 pcs
* Quick reference guide