Behringer DCX2496 UltraDrive Loudspeaker Management System

Specifications
Analog Inputs: A, B, C
Type: XLR, electronically balanced
Maximum Input Level: +22dBu
Input Impedance: Approx. 35 k Ohms at 1kHz
Crosstalk: -72dB at 0dBu
Digital Input: A
Connector: XLR
Format: S/PDIF or AES/EBU
Input Level: 0.3 to 10Vpp
Input Impedance: Approx. 110 Ohms
Sampling Frequency: 32 to 96kHz
Special Feature: Sample Rate Converter
Microphone Input: C
Type: XLR, electronically balanced
Maximum Input Level: -23dBu
Input Impedance: Approx. 670 Ohms at 1kHz
Phantom Power Supply: +15V
Analog Outputs: 1, 2, 3, 4, 5, 6
Type: XLR, electronically balanced
Maximum Output Level: +22dBu
Output Impedance: Approx. 100 Ohms at 1kHz
Crosstalk: -100dB at 10dBu
Sampling Frequency: 96kHz
Signal Delay: Less than 1ms analog input to analog output
Frequency Response: 10Hz to 45kHz (-3dB) typ.
Dynamic Range: 112dB
THD+N: 0.007-percent at 0dBu, 0.004-percent at 10dBu
A/D Converter CS5381:
Resolution: 24-bit Delta-Sigma
Oversampling: 64x
Dynamic Range: 120dB typ.
D/A Converter AK4393:
Resolution: 24-bit Delta-Sigma
Oversampling: 64x
Dynamic Range: 120dB typ.
Serial Interface - RS-232:
Type: 9-pin sub-D connector
Transmission Type: 115200 bauds, 8 data bits, 1 stop bit, no parity
Serial Interface - RS-485 (2x):
Type: RJ-45 connector
Transmission Type: 38400 bauds, 8 data bits, 1 stop bit, no parity
Power Consumption: Approx. 12W
Fuse: T 1A H
Mains Connector: Standard IEC receptacle
Dimensions: 45mm x 483mm x 208mm / 1.75in x 19in x 8.1in (H x D x W)
Weight: Approx. 2kg / 4.4lbs